Security: Video

This article provides you the solution when the MIC IP starlight 7100i camera wiper stops on the screen. Furthermore, you will learn how to perform a physical reset of the camera.

Are you looking for the MIC IP fusion 9000i Wiper/Washer RCP command syntax to incorporate it in the third party software?

Related Products AUTODOME IP starlight 7000i (NDP-7512-Z30xx), MIC IP starlight 7100i (MIC-7522-Z30xx), and MIC IP Ultra 7100i Symptoms Complaints received about video performance in terms of sharpness, focus, and color. AUTODOME IP starlight 7000i (NDP-7512-Z30xx), MIC IP starlight 7100i (MIC-7522-Z30xx) Complaints received about NTCIP Autofocus, Autoiris, and MIC wiper control. All models listed above. Diagnosis Video Performance Incorrect default settings, camera block performance, and compatibility issue between the optical characteristics of the bubble and the camera block. (Not applicable for the MIC IP ultra 7100i) NTCIP Controls Autofocus and Autotiris functions were released in 2007, but the NTCIP standard was changed in 2014. These functions were not used in the ITS market until recently. Wiper Operation This operation was never implemented and no complaints were received until June, 2020. (MIC models only) Solution FW release 7.72.0008. Camera performance of the camera block was improved and requires the customer to upgrade the camera block FW per the procedure in the PDF attached. (Not applicable for the MIC IP ultra 7100i)   The FW was updated to support the NTCIP operations per the 2014 standard.