Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    yesterday
    Question What information is required when you request a password reset for your recorder? If you forgot the password of you recorder and you want to reset its password, the Central Support Team can help you. Before requesting a password reset, please note that you need to provide some important information to the Central Support Team to get help from them. Answer Please follow the steps from this article and find out what information is needed if you want to reset the password of your: Divar XF/700 Divar MR DVR400/600 Divar Analog 3000/5000 Divar Hybrid & Network 2000/3000/5000   Note:   Please note that you can provide the Central Support Team with a   picture   of the   label of the   unit, in order to prevent misunderstandings or  misspelling . 💡   Be aware that in exceptional cases,   you may be required to send them an invoice of your unit or other proof of ownership. Label of the unit:   Important :   You must be locally connected to your recorder with: monitor, keyboard and mouse. ⚠️   Kindly note that the code received from the CTS is valid only for 1 Day.
    View full article
    yesterday
    Question   Where and how should unlock codes be used to reset the DIVAR recorder password? This article is applicable for the following DIVAR recorders: Divar XF/700 Divar MR DVR400/600 Divar Analog 3000/5000 Divar Hybrid & Network 2000/3000/5000   Answer When you request to reset the DIVAR password, the Central Technical Support team provides you with the unlock codes.   ⚠️  Kindly note that the unlock codes received from the CTS are valid only for 1 Day. Moreover, please make sure that the date displayed on the Live monitor matches the date you requested the password reset. For more information, please check the following article: What information is required when you request a password reset for your recorder?   In order to fill in one of the provided unlock codes, you will need to connect locally to the DIVAR unit -> Monitor, mouse and keyboard are needed. Use the following: User name: ADMINISTRATOR Password: one of the provided unlock codes
    View full article
    yesterday
    Question Which CPP corresponds to certain cameras and encoders? Answer The capability of a Bosch IP camera or encoder is driven by two forces: One is the hardware capability, defined by the Common Product Platform (CPP) itself and the combined components of the product. The other is the firmware that drives this hardware. The firmware is developed on a common code basis and derived from there for the active platforms, making the feature sets of various platforms fairly similar within a certain firmware version. This article gives an overview of CPPs that correspond to certain types of cameras and encoders. Here you can search by the CTN of the camera and find out the CPP of it. Thus, you will know which firmware you should use for upgrading your device.
    View full article
    yesterday
    ⚠️ NOTE:  The procedure is the same for all 2U and 3U systems, except 3108 FW might be different, depends on the exact model. There are two drive arrays with below instructions on recreating. After Drive preparation rerun Factory default procedure
    View full article
    yesterday
    What happens when you upgrade the SW of your Management Server form e.g. BVMS 10.0 to BVMS 10.1 and you have not prepared a BVMS 10.1 activation key beforehand? => The System will be unlicensed and Operator Client will not be able to connect to the MS as long the new BVMS 10.1 activation key is not provided to the system via Config-Client. Therefore,   performing the steps from this article is absolutely necessary.
    View full article
    Tuesday
    Question What is a CPP and where you can find it for you Bosch IP camera?   Answer   To guarantee high quality imaging through the entire range of products, Bosch Security Systems uses a Common Product Platform (CPP). A CPP is a reference design that serves as a solid base for future cameras. Based on the same CPP, sub- or new products can be generated more easily by using a different sensor and/or a different housing. Each product cannot only benefit from the features provided by the platform but can also advance its functionality. Other advantages: easier integration with 3rd party security system components, such as VMS and recording solutions. allows installers and integrators to use the same interface that supports the entire Bosch product portfolio. new camera and software releases, regardless of the price segment, can be easily added to an existing security surveillance system. it helps you to find the right version of firmware you need for your camera   Where you can find the CPP of you Bosch IP camera?   1. Release notes: you can search for it directly on the product page > under Downloads section you will see the CPP version of your camera. In this example, the CPP for FLEXIDOME IP panoramic 5000 MP camera is CPP4:   2.  You can find the CPP of your camera on the web page by entering the IP address of it. Go to Configuration > Service > System Overview   CPP & Firmware: All firmware releases for the various Common Product Platforms (CPP) for Bosch IP cameras and video encoders can be found on the Bosch Security and Safety Systems page in Download Area. For detailed information of a specific product, the product catalogue is the recommended way to go. Those, who just need to update firmware and already know the platform which their product is based on, may directly go to the Download Area for a quicker and condensed overview   Other useful articles related to CPP & Firmware: Where you can find the intermediate firmware version when upgrading CPP4 cameras? What is the maximum firmware version supported by cameras depending on the BVMS version? TB VS: Bosch IP Video increased security with Firmware 6.51 / Firmware downgrade dependencies FAQ VS: How to upgrade from <6.10 to Firmware 6.50 and usage of the "combined firmware file 6.50"
    View full article
    Tuesday
    This guide is meant to explain how to enable the appropriate debug commands for logging during random reboot situations, and which logging to collect for troubleshooting, as in general there are multiple triggers that can cause a device to reboot. The information gathered will help to analyze the root cause.  Please make sure that all of the logs collected cover the same time period.
    View full article
    Monday
    ?   Hint: A) If you would like to search for the   BVMS version   that can be used according to the   firmware version of your DSA E2800, please check the following link: TB-VS: Plan for a new Firmware for NetApp E2800 iSCSI storage (dual controller) systems B) The Serial Number (SN) of your DSA E2800 is displayed under   Support   >   Support Center   in the upper right corner.
    View full article
    a week ago
    Related Products: BVMS, application crash, memory dump This article lists the scenarios in which technical support normally request dump file from a BVMS system. It contains general guidelines how to create a dump file for BVMS system and provides links to more concrete articles, that correspond to particular issues and exact steps to create a dump. BVMS dumps are needed to troubleshoot the following types of issues: Application crashes – dump is expected to provide more information about the cause of the crash and its origin. Memory or handle leaks – dump is expected to point to their origins Deadlocks, freezes and hangs – dump is expected to point to their origins Recommended tool to create BVMS dumps. The recommended tool is Procdump. It is a command line tool which must be started from the command shell. Development provides couple of .bat files that start Procdump with predefined parameters and cover the most common dump creation cases. The tool as well as the set of .bat files are attached to this article: BVMS_DumpTools_V2.zip The batch file names follow a naming guideline: <Executable>_<Dump use case> , where <Executable> is one of: ConfigClient ConfigWizard OperatorClient ManagementServer ArchivePlayer ExceptionTest and <Dump use case> is one of SingleDump TwoDumps DumpOnException DumpOnHang ActivatePostmortemDebugging There are 3 possible error scenarios and corresponding dump creation methods: Dump creation for reproducible crashes that trigger Windows Error Reporting Run the affected application/service (Operator Client, Configuration Client or Management Server Service) Reproduce the steps that lead to the crash Leave the Windows crash dialog open Run the corresponding batch file for creating a single dump: *_SingleDump.bat. E.g. run OperatorClient_SingleDump.bat to create a single dump of the Operator Client process. Provide support with the resulting .dmp file a description of the steps to reproduce the problem ConfigCollection Note: attached you can find a configured example for this scenario and application Operator Client - BVMS_OC_dump_onException.zip Dump creation for reproducible memory or handle leaks Run the affected application/service (Operator Client, Configuration Client or Management Server Service) Run the corresponding batch file for creating two dumps: *_TwoDumps.bat. E.g. run OperatorClient_TwoDumps.bat to create two dumps of the Operator Client process. Note that by default, the delay between the two dumps is set to one hour (3600 seconds). Depending on the magnitude of the memory leak, you might want to increase/decrease the delay. To do that, edit file *_TwoDumps.bat: replace value "3600" by a value that fits your needs e.g. a value of "7200" will create two dumps with a delay of two hours. Reproduce the steps that lead to the memory leak. Wait until the second dump was created. Provide support with the resulting two .dmp files a description of the steps to reproduce the memory leak a ConfigCollection Dump creation for crashes/hangs/freezes that are hard to reproduce Deactivate the restarting option for Operator Client / Configuration Client: To deactivate the restarting option for Operator Client / Configuration Client: edit ..\Bosch\VMS\bin\ConfigClient.exe.config or ..\Bosch\VMS\bin\OperatorClient.exe.config. Navigate to section <appSettings> add a new entry <add key = "DisableExceptionHandling" value="TRUE" />. Run ActivatePostmortemDebugging.bat Run the affected application/service (Operator Client, Configuration Client or Management Server Service) As soon as the issue appears, check whether the dump was created. Provide support with the resulting .dmp file description of the steps to reproduce the crash ConfigCollection Note: attached you can find a configured example for this scenario and application Operator Client - BVMS_OC_dump_Just-In-Time-Debuger.zip
    View full article
    a week ago
    This information  may be requested by Central Support Team, as the bundle file is useful for troubleshooting the improper behavior of the unit. This method provides the steps for collecting the NetApp DSA E2800 support bundle.
    View full article
    a week ago
    To ensure the highest customer satisfaction and replace the defective hardware faster and more smoothly, it is necessary to register each system for the specific country together with the system location. But where and why should you register your device?
    View full article
    a week ago
    Question: Let’s suppose that you have one setup which consists in an Adam 6060 I/O module, BVMS 10.1 and a DINION IP thermal 8000 camera. Can the state of an ADAM relay module be changed when the IVA from the camera generates an alarm?
    View full article
    a week ago
    If you want to control the camera from a DIVAR wired through a VJD 3000, you have to configure the VJD and the DIVAR as well. Below you will find the steps which will help you to set up your devices.
    View full article
    a week ago
      Did you try to upgrade the firmware of your camera and the message below was displayed? Find out from this article what might be the cause that could lead to this message being displayed: “error 18: wrong or no signature”
    View full article
    a week ago
    Question Why I cannot see my camera in the Logical Tree from Operator Client? Answer Please make sure that you have done all the steps below accordingly. Normally, to be able to view a camera in the Operator Client, you need to: Go to the Maps and Structure tab from Configuration Client. Drag and drop the camera in question from the Device Tree to the Logical Tree. Save and Activate the changes. This step is very important because otherwise, you will not be able to see the changes in Operator Client, even though the first 2 steps were carried out in Configuration Client.
    View full article
    a week ago
    Question: The Dashboard of Bosch cameras shows a lot of data points and general information about them, including details about their temperature as well. Is it a cause for concern if the temperature of Flexidome IP 5000i IR (NDI-5503-AL) is higher than other cameras?
    View full article
    a week ago
    Find out here what could be the cause of the following message displayed on DIVAR IP 7000 R2: "The instruction at 0x6566f31c referenced memory at 0x00000008. The memory could not be read."
    View full article
    a week ago
    Question: Do you want to configure Video Content Analysis of your device and "VCA: Authorization required" message is displayed in Configuration Manager? Find out here why this message is displayed and what you should do to fix it .
    View full article
    100% helpful (1/1)
    a week ago
    Question: If your VIDEOJET decoder does not seem to work properly ,   most likely it is because the software (SW) version used is not compatible with the firmware (FW) version of your device. But which are the system requirements for configuration/ operation purposes of VIDEOJET decoder 3000/ 7000/ 8000?
    View full article
    a week ago
    Question   Which are the RTSP request URLs of SONY cameras for getting live stream?   Answer   The URL for RTSP stream (for example in VLC Media Player) should have the following format: rtsp://IP/media/video1 or for Stream 2:   rtsp://IP/media/video2 or in case credentials are needed:   rtsp://user:password@IP/media/video1 Note:   If you cannot access one of the streams , the likely cause for this issue is that the stream is not enabled in the video codec settings.  Solution: SNC-DH140: In the web interface, go to Setup > Camera, and in the video codec Tab, Verify Image 2 Codec is not off. SNC-VM600: In the web interface, go to Setting > Video/Audio, and in the video codec Tab, Verify Image 2 Codec is not off. ❗   Please refer also to the attached document which  describe s  technical details about RTSP streaming function  supported by  the 6th  generation of  Sony Network Came ra s:
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist