Security: Video

Have a look in this article to learn how you can add ONVIF cameras to Configuration Manager through VSG managed by VRM.

This article lists the initial troubleshooting steps and concrete instructions for collecting logging for issues with ONVIF cameras, added to BVMS system. We will classify the different issue scenarios one can have using ONVIF cameras in BVMS system. Depending on the issue the article lists the required logging to start initial troubleshooting.

ONVIF control of the thermal DZ was never planned for the MIC-9000i in the launch of the product. However, you can get the Pan and Tilt via ONVIF Device Manager to work by enabling the PTZ configuration of the stream. 

This article is applicable for all the requests related to   third party products   integrated in   Bosch Video Management System Software   over   ONVIF .

This article lists the initial troubleshooting steps for issues with ONVIF cameras, added to BVMS system as Live Only ONVIF cameras. The specific point in this scenario is VSG is not used.  

This article shows how to check if particular non Bosch camera is supported in BVMS.

XProtect offers 3 different modes of metadata streaming. What are the differences there?

MQTT is a Client Server publish/subscribe messaging transport protocol.

Depending on the license type you have installed in the Bosch Video Management System (BVMS), you can add a  certain number  and different types of cameras/ encoders.  BVMS s upports 3 rd  party cameras as well, but they need to be compliant to  ONVIF Profile S. This article explains how to add new ONVIF cameras to a system that runs in full Bosch Video Management System (BVMS) via the Configuration Client. We recommend using Bosch Workstations and Servers. They are fully tested and optimized for Bosch Video Management System. Article requirements: BVMS installed ONVIF camera PC/ Server/ Workstation

It is possible to add ONVIF compliant cameras to Bosch Video Management System as live only devices or as VSG devices (then the cameras will also record). This article explains how to add an ONVIF camera as VSG device in full Bosch Video Management System (BVMS 10.1). We recommend using Bosch Workstations and Servers. They are fully tested and optimized for Bosch Video Management System.   Article requirements: BVMS installed ONVIF camera. Please refer to BVMS - ONVIF Device compatibility for additional information. PC/ Server/ Workstation