Security: Video

In this article you will see how to import   project files into Configuration Manager in both versions: v6.10 & v7.41  

Use the project assistant to commission multi-camera projects and generate project reports. Available for Windows and iOS and Android. 

Check this article and see what's new in Project Assistant version 2.0.0

Check this article and see what's new in Project Assistant version 1.2.2

Check this article and see what's new in Project Assistant version 1.2

Check this article and see what's new in Project Assistant version 1.2.3

Check this article and see what's new in Project Assistant version 1.4.0

Check this article and see what's new in Project Assistant version 1.4.1

Check this article and see what's new in Project Assistant version 1.3.1

The initial idea of the Project Assistant is nicely summarized in the video from this article

Find out from this article in which situations the  MAC address cannot be found or only part of the address is correctly extracted in Project Assistant when scanning a QR or Data Matrix code

This article explains how to configure a single camera that already has a fixed IP address assigned, using Project Assistant App.

Remote camera access:  Connect directly to your cameras via the Remote Portal to tweak image settings or check the camera calibration.

Use the Project Assistant to its full extent and once the cameras are connected to the target network, perform a network scan using the BVMS Configuration Client

This is the old way as for Project Assistant versions < 1.3.

he Project Assistant offers two ways of importing existing project data: Option 1)   Importing a   .bpassist   file, which was exported from the app at some point and which contains all information and data ever created/entered inside the app for that specific project. Simply select the "Project Assistant" mode >> click "continue" >> and press "import". Option 2)   Importing from a   tab-separated   text   file. This option may be useful, if you have existing project data, e.g. in an   Excel   spreadsheet, which you want to transfer into the Project Assistant for further use. This article deals with   option 2   and explains the steps potentially needed before you can refer to the steps explained in the following   Youtube video   ("Import from file").