Alarm functions include local inputs and relay outputs, plus motion detection in user-defined areas. If an alarm is detected, the DIVAR can:
send an e-mail notification and/or FTP push
sound a buzzer and/or display a warning
activate local alarm output
You are using one Divar network 2000 and you have a new Flexidome IP 5000i IR camera, but you cannot add it to the Divar because it is not displayed in “Detection” > “Device search” screen.
Divar network 2000 connected to one monitor
Flexidome IP 5000i IR
You didn’t set up the internal IP settings of the DIVAR.
Assigning the device to a network range which is different than the internal or external network range will lead to a situation where the cameras will no longer be accessible by the recorder.
A warning message is shown and using this feature will not work.