Each camera imager can be configured separately and therefore many settings can be made and checked separately.
Settings in the Installer Menu can be made on a per-camera basis, including sensor mode, image rotation & lens settings with the lens wizard.
Please find in this article some settings you can do separately for each FLEXIDOME multi 7000i camera imager on the camera’s web page.
Some options have been removed when compared to previous CPPs, as they are only useful for moving cameras.
Find here the overview of the web page of ‘Live’ functions section and the options remained available for FLEXIDOME multi 7000i (CPP14) cameras.
‘Display stamping’ submenu has been moved from the General menu to the Camera menu.
Open one browser
Type the IP address of your camera
Go to Configuration > expand the Camera menu. The "Display stamping" menu will be displayed there. Options are much more flexible than in the previous cameras, they are now like CPP13 cameras (INTEOX).