Important Cookie Information

This website uses absolutely necessary cookies. If you consent to the use of convenience cookies, please click “Yes, I agree.” By clicking on “Privacy Settings.” you can change this setting at any time and withdraw your given consent. Icon down see more You can find detailled information in our Privacy Policy Icon forward-right
Icon up see less

Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    ‎05-29-2019 08:16 AM
    Upcoming with FW 7.10 and CM 6.20, Camera Trainer is a licensable Intelligent Video Analytics module that allows uses to define objects of intereste and train their own detectors for them based on examples of target objects and non-target objects. In contrast to the moving objects detected in general by IVA 7.10, Camera Trainer allows detection of both moving and non-moving objects, separates and immediately classifies them. Training can be done both on live video as well as on recordings available through the respective camera. The resulting detectors can be down- and uploaded for distribution to other cameras. The attached fact sheet lists the cameras that support Camera Trainer. The attached technical note describes in-depth what Camera Trainer is, how it works, what to use it for and what not, and how to configure it. The configuration is also shown in the following how-to videos: Setup Camera Trainer Camera learning phase with recorded video   Configure Camera Trainer Task   Backup Camera Trainer Configuration - Method 1   Backup Camera Trainer Configuration - Method 2 Setup VCA Masking
    View full article
    100% helpful (1/1)
    ‎02-12-2019 02:12 PM
    The attached technical notes give a short introduction to scripting alarm and counter tasks with Intelligent and Essential Video Analytics in FW 6.60. It also provides a broad selection of example scripts for explanation as well as including real world application examples.
    View full article
    ‎02-14-2019 01:02 PM
    This Video should help you to understand, what calibration means, why and when to calibrate the cameras.
    View full article
    100% helpful (2/2)
    ‎02-12-2019 02:22 PM
    In BVC 1.5 and BVC 1.6 the Forensic Search option (IVA) is not visible in the GUI anymore.
    View full article
    ‎02-12-2019 02:14 PM
    There are several Video Content Analysis (VCA) algorithms available in Bosch IP cameras: Tamper Detection, MOTION+, Essential Video Analytics, Intelligent Video Analytics and Intelligent Tracking. To receive alarm events from them and visualize the results, a client is needed. Each client can choose to present only a part of information and in a different way. The attached technical note gives a high-level overview of the clients supplied by Bosch and the different integration possibilities into 3rd party systems available today. Further information concerning integration into 3rd party software can be found at the Integration Partner Program (IPP) webpage.
    View full article
    ‎02-12-2019 02:13 PM
    The tech note in the attachment describes how to set up map displays of objects detected and tracked by Intelligent Video Analytics, Essential Video Analytics or Intelligent Tracking with FW 6.4x and Video Security Client 2.1.
    View full article
    ‎02-12-2019 02:15 PM
    The attached technical note describes w hich camera settings influence the performance of Essential or Intelligent Video Analytics in Bosch IP cameras, and what the best practices are.
    View full article
    ‎02-12-2019 02:11 PM
    The technical note in the attachment details device-specific as well as version-specific differences of Intelligent and Essential Video Analytics from FW 4.0 up to FW 6.60.
    View full article
    ‎02-12-2019 02:15 PM
    The attached technical note describes h ow to benchmark and differentiate video analytics solutions.
    View full article
    100% helpful (1/1)
    ‎03-18-2019 11:22 AM
    Related Products: Video Analytics for Firmware 6.60 and above This article covers traffic monitoring of Bosch Video Analytics with How to Videos (one already available and one in planning) Default scenario of wrong way detection Learn how to use the default scenario of wrong way detection: A predefined scenario that can be used to detect an object that is traveling the wrong way.   Default scenario traffic incidents This predefined scenario is designed to detect common traffic incidents on roads: Wrong way – triggers an alarm if object travels in wrong direction Pedestrian – triggers an alarm if pedestrian is on the road Slow vehicle – triggers an alarm if vehicle moves slower then predefined speed. Stopped vehicle – triggers an alarm when vehicle is stopped longer than predefined time span. Dropped object – Triggers and alarm if an object is dropped on the road   This how to video shows in detail how to use the predefined tasks Wrong way, Slow vehicle and Stopped vehicle.   Note: If needed you can get additional how to information on camera calibration.  
    View full article
    ‎02-12-2019 02:16 PM
    The attached technical note describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check
    View full article
    ‎02-14-2019 12:57 PM
    Related Products: Video Analytics for Firmware 6.60 and above Technical Note on Intrusion Detection The technical Note  attached to this article contains detailed technical description of Intrusion Detection, set up guidance for different usage scenarios and best practices. It is useful to get in depth knowledge about Intrusion detection or to find the answer of frequently asked questions.   Intrusion detection without calibration Learn how to use the default scenario - Intrusion detection no camera calibration: A predefined scenario that can be used to detect intruders in small areas and controlled environments   Intrusion detection one field   Learn how to use the default scenario - Intrusion detection one field: A predefined scenario that can be used to detect intruders in small areas.   Intrusion detection two fields   Learn how to use the default scenario - Intrusion detection two fields: A predefined scenario that can be used to detect intruders in large outdoor areas.  Note: If needed you can get additional how to information on camera calibration.
    View full article
    ‎02-14-2019 12:55 PM
     Related Products: Video Analytics for Firmware 6.60 and above This article describes how to count with Bosch Video Analytics with How to Video and a Technical Note on the topic. View the video to get initial idea how to set up the feature, short explanations on the prerequisites and an example configuration.    For in depth description of the feature counting please check the attached Technical Note. It provides background information and technical details and can support you to configure and optimize a particular counting scenario.  How to Video: People counting default scenario Learn how to configure the default scenario - People counting: A predefined scenario that can be used to count people that are crossing a specified / specific line.   Technical Note on Counting The attached document describes in depth the count feature of Video Analytics. It explains how to plan the camera perspective and best practices for camera view, the set up for the scenario people counting and the options to access the counter data.   Note: If needed you can get additional how to information on camera calibration.
    View full article
    ‎02-12-2019 02:19 PM
    Never lose track of an object of interest! Intelligent Tracking automatically zooms in to and follows a selected Intelligent Video Analytics object as far as possible with the camera. For AUTODOME / MIC IP 7000, this means automatically steering the camera to zoom in to the object and follow it. For a FLEXIDOME IP panoramic 7000, Intelligent Tracking is available in the Virtual PTZ video and steers the dewarped cut-out. For DINION / FLEXIDOME IP 7000 / 8000 cameras, Intelligent Tracking can steer a region of interest (ROI) stream. The technical note in the attachment discribes how to set Intelligent Tracking up with FW 6.30 and lists the differences based on the camera types.
    View full article
    ‎02-12-2019 02:16 PM
    The attached technical note describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.
    View full article
    ‎02-12-2019 02:18 PM
    The museum mode of Intelligent and Essential Video Analytics is an optimized tracking mode to detect whenever someone tries to reach towards and touch a valuable asset like a museum exhibit. It can also be used in any other application where approaching a sterile zone from a more crowded environment shall be detected. The attached tech note describes when and how to use it with FW 6.30.
    View full article
    ‎02-12-2019 02:18 PM
    Object classification takes an object detected and tracked by either Essential or Intelligent Video Analytics, evaluates its geometric and speed properties, and decides whether the object is an upright person, a bike, a car or a truck. The technical note in the attachment provides an overview of object classification, describes how to configure it with FW 6.30, and what the limitations are.
    View full article
    ‎02-12-2019 02:17 PM
    The technical note in the attachment describes how to track ships using Intelligent Video Analytics with FW 6.30, how to configure this and what the limitations are.
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist