Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    100% helpful (1/1)
    ‎04-05-2021 11:39 AM
    Do you want to configure the 3rd party iSCSI storage with different LUNs for recording more cameras without Bosch VRM? This article explains you if this application is supported.
    View full article
    ‎08-13-2021 08:52 AM
    From BVMS 10.0 onwards BVMS is an ONVIF Profile S conformant client. Cameras which are listed as Profile S compliant product on the ONVIF website are supported based on the ONVIF Profile S functionality. In the table below you can find an overview of the tested and supported ONVIF cameras for BVMS.   Version List of tested cameras BVMS 7.5 BVMS 7.5 list of tested ONVIF cameras  BVMS 8.0 BVMS 8.0 List of tested ONVIF cameras  BVMS 9.0 BVMS 9.0 List of tested ONVIF cameras  BVMS 10.0 BVMS 10.0 List of tested ONVIF cameras  BVMS 10.0.1 BVMS 10.0.1 List of tested ONVIF cameras  BVMS 10.1 BVMS 10.1 List of tested ONVIF cameras    The table below shows in which situation a specific camera can be connected to BVMS and is supported. BVMS version BVMS 9.0 and older BVMS 10.0 and newer ONVIF Profile S compliant camera Yes Yes Yes Yes BVMS tested camera Yes No Yes No           Supported camera Yes No Yes Yes   For BVMS version 10.0 and above, please make sure to go through these steps: Please check the List of tested cameras. If the device is not listed in the List of tested cameras, then please check   here   and make sure that your device is ONVIF Profile S compliant. If your camera is not listed in the tested cameras and is not listed on the ONVIF website as Profile S conformant, we cannot help you when you have an issue with this device. You should approach the device manufacturer to certify the device as ONVIF Profile S conformant. For example, if you have an   Axis camera, M1004 model, please fill in your product details in the Application Type, Profile(s), Manufacturer and the Product Name fields, under the   Product Search   option, and press on the “Search” button: 3. If your device is ONVIF profile S compliant you can contact Bosch Central Technical Support and request assistance. Additional information: Cameras listed as tested are owned by Bosch and issues can be fully investigated by Bosch. Cameras not listed as tested are not owned by Bosch. Solving issues might take longer as it requires collaboration with the camera vendor. Bosch support teams might need to refer to the camera manufacturer’s support line to help fixing the issue. We consider the firmware listed on the ONVIF website as the minimum firmware version of a camera. Please let us know if you run into issues with newer firmware versions so that we can investigate those accordingly. If the problem is a firmware regression, we might need to refer you to the camera manufacturer for support.
    View full article
    ‎04-06-2021 08:43 AM
    To ensure the highest customer satisfaction and replace the defective hardware faster and more smoothly, it is necessary to register each system for the specific country together with the system location. But where and why should you register your device?
    View full article
    Top Contributors