Security: Video

This article describes the mechanism of ANR 2.0 and how it can be set up. In the following ‘camera’ is used as a representative for all video source devices supporting ANR 2.0.

When using ANR function in combination with 'alarm only' recording , recording 1 is with only the motion recorded.

This article explains how to playback the SD card recordings in Operator Client from a camera added as Local Storage in BVMS Lite 10.1

This article lists how to configure ANR feature in BVMS and how correctly to set up iSCSI and direct replay.  Configuration   of   ANR in BVMS system Insert SD card into camera and power it on. In Configuration Client, select Devices page. Device password and CHAP password. There are two possible configuration set ups - to configure password for both device and iSCSI connection or to leave both without password. Choose and configure one of them (3.1 or 3..2).    3.1.  Set device user password and CHAP password 3.2.  No CHAP password for ANR Note: Mixing the parameters between the two options 3.1 and 3.2 will lead to issues in direct replay from SD card.