Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 
    Sort by:
    ‎08-02-2022 03:29 PM
    The solution is via a workaround using an ATSL script in the encoder to re-set the COM port baud-rate upon a reboot/restart of the encoder (which should in normal practice not happen to often).
    View full article
    100% helpful (3/3)
    ‎01-25-2024 09:31 AM
    Find out from this article which Bosch encoders and decoders are compatible with BVMS
    View full article
    ‎12-05-2023 08:25 AM
    Different devices, whether cameras or encoders, offer a different amount of processing power for video content analysis (VCA).
    View full article
    ‎06-16-2022 03:31 PM
    The purpose of this article is to help you find the customer number and the material/ serial/ commercial type number of your Bosch device in different ways.
    View full article
    ‎02-22-2023 01:38 PM
    This article describes how can you disable password Policy for Cameras/ Encoders and provide compatibility with older/ 3rd party systems.
    View full article
    100% helpful (1/1)
    ‎06-03-2022 09:28 AM
    This article contains the Alarm Task Script for JPEG post to FTP every 30 minutes for Bosch IP encoders
    View full article
    100% helpful (2/2)
    ‎08-04-2022 11:40 AM
    This is an example on how to integrate 3rd party devices/software to trigger an event to take place on the encoder. 
    View full article
    ‎03-01-2023 03:48 PM
    If your DINION IP Thermal 8000 (NHT-8000) camera is reporting blurred/unclear/unsharp images that are randomly appearing during the day, or the night, please follow the steps below in order to fix it.
    View full article
    ‎07-15-2022 04:27 PM
    Place the script from this article in the alarm task editor and save it.
    View full article
    ‎08-02-2022 04:54 PM
    This will let you call up cameras on an Allegiant monitor output across the network to a remote site.
    View full article
    ‎08-03-2022 10:44 AM
    Connections and programming for VIP X1XF and VG5 600 Dome.
    View full article
    ‎06-30-2022 12:50 PM
    BP+ (Baseline Profile +) is available in any of the new ARM based chipset encoders, like the VIP-X1 XF.  BP+ is needed for compatibility with Divar and hardware decoders, for example, theVIP XD decoder.
    View full article
    100% helpful (1/1)
    ‎03-29-2024 11:52 AM
    This article explains how to use the settings as per the devices current configured capabilities if you just added a device to BVMS, you get the possible stream options as per a “Config table” known to BVMS.
    View full article
    ‎03-31-2023 10:11 AM
    Answer This guide is meant to explain how you can find the connection state events of a camera in Operator Client - Bosch Video Management System.
    View full article
    ‎04-27-2022 07:31 AM
    Check this article and find out the port of VideoJet X20/X40 XF that must be opened in the firewall for video stream transmission
    View full article
    ‎07-11-2023 08:38 AM
    Find out from this article if is it possible to get a raw video stream from a Bosch camera
    View full article
    Top Contributors