Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    ‎06-07-2018 10:33 PM
    How to terminate a M12 connector for FLEXIDOME micro 5000 MP? Both RJ45 and M12 plug connectors are available with IEC 11801:2002 Cat5 compliance. This further simplifies the concurrent use of both connector types within a single system. Assembly consists of three easy steps, none of which require specialist tools. The plug connectors, compliant with all standards and fully shielded against EMC interference, are available in four-pin and eight-pin configurations. They can be connected to flexible or rigid wires, with sizes ranging from AWG 26 to AWG 22. This makes the connectors suitable for all Industrial Ethernet transmission systems, Ethernet-based fieldbus systems such as Profinet, and EtherNet/IP up to gigabit speeds. The M12 Quickon connector provides a sturdy metal housing with a plug-and-turn mechanism. A 360 degree shielding connection with an iris spring means the connector is well suited to system environments with large amounts of EMC interference. The compact design of the RJ45 Quickon connector, on the other hand, makes it suitable for horizontal or vertical multi-port connection (as is frequently required by switches, for example). Connector ID rings are available in eight colors to visually aid patch-bay layout. 
    View full article
    ‎05-16-2018 09:31 AM
    Product Security Advisory: Meltdown and Spectre vulnerability in Common Product Platforms (CPP)
    View full article
    ‎09-11-2020 01:16 PM
    This recommendation could be applied if the storage is overloaded, as there are several Onvif cameras running through it.
    View full article
    ‎12-04-2020 01:23 PM
    A possible situation can occur when you have, for example, one DIP 3000 with BVMS 8.0 and CPP7.3 cameras. The cameras are not working because the firmware is old. The problem that might arise could be: Configuration Client will display a message like: "unknown platform" Gaps in recordings or not recording at all VCA settings cannot be changed Logs warning: "2020-11-22 04:49:29.339;cameraId=\0\1;Sender;Error;This device has an abnormal high storage consumption. To protect other recordings, storage allocation is reduced. But this may result in recording gaps for this device"
    View full article
    100% helpful (1/1)
    ‎12-04-2020 03:45 PM
    Question Often, the camera image is running fine, then begins to stutter when the objects are in moving scene or in a complex environment. Your view starts looking like a slideshow, things get visibly choppy and swaying objects start to move less fluidly. This behaviour can be controlled by changing the frames per second   (FPS) value or upgrading the Firmware   of your camera. ❓   But where can you find or change the frame rate & Firmware settings of Bosch cameras?   If you want to improve the image quality of your Bosch camera and you did not find the FPS option in the Web User Interface, please follow this article and you will find the answer. So, keep reading this article and find out where you can get multiple information including the   Firmware version of your camera, from a single comprehensive system overview page.
    View full article
    Top Contributors