AUTODOME 7000 HD, MIC 7000i, and MIC 9000i
Why is the minimum FW version 6.52.0003 for these models?
In November 2018 an internal hardware (HW) change was made to these models that requires this new minimum FW version. The new HW version isn't backwards compatible with older FW versions.
If the unit has been upgraded to a higher version, how do I get the 6.52.0003 FW?
This FW version was only released for these three models, so it isn't available on the Bosch Download Store. At this time, please contact Technical Support to obtain this FW. It will be available on the individual Product catalog pages by March 11, 2019 (or sooner).
As video surveillance use grows in commercial, government and private use cases, the need for low-cost storage at scale is growing rapidly. BVMS, Bosch cameras, HPE hardware and SUSE Enterprise Storage provide a platform that is an ideal target for recording these streams.
There are numerous difficulties around storing unstructured video surveillance data at massive scale. Video surveillance data tends to be written only once or become stagnant over time. This stale data takes up valuable space on expensive block and file storage, and yet needs to be available in seconds. With this massive scale, the difficulty of keeping all the data safe and available is also growing. Many existing storage solutions are a challenge to manage and control at such scale. Management silos and user interface limitations make it harder to deploy new storage into business infrastructure.
The solution is software-defined storage (SDS). This is a storage system that delivers a full suite of persistent storage services via an autonomous software stack that can run on an industry standard, commodity hardware platform. Bosch, Hewlett Packard Enterprise (HPE) and SUSE have partnered to deliver the benefits of SDS to the video surveillance industry. Using SUSE Enterprise Storage™ on HPE ProLiant DL and Apollo servers in a Bosch video surveillance environment simplifies the management of today’s volume of data, and provides the flexibility to scale for all enterprise storage needs.
The full description can be found in the attached whitepaper.
MIC IP starlight 7000i (MIC-7502-Z30x), MIC IP fusion 9000i (MIC-9502-Z30xxx)
MIC IP starlight 7100i (MIC-7522-Z30xx), MIC IP Ultra 7100i (MIC-7504-Z12xx)
AUTODOME IP starlight 7000i (NDP-7512-Z30xx)
Complaints received about video performance in terms of sharpness, focus, and color.
AUTODOME IP starlight 7000i, MIC IP starlight 7100i.
Complaints received about focus failure,
MIC IP starlight 7000i, MIC IP fusion 9000i .
Complaints received about NTCIP control of Autofocus, Autoiris, and MIC wiper.
MIC IP 7000i, MIC-9000i: Focus failures caused by an unexpected range of tolerances in a small percentage of lenses.
AUTODOME IP starlight 7000i: Incorrect default settings, camera block performance, and compatibility issue between the optical characteristics of the bubble and the camera block.
MIC IP starlight 7100i : Sharpness and color performance were not aligned with the previous model.
Autofocus and Autoiris functions were released in 2007, but the NTCIP standard was changed in 2014. These functions were not used in the ITS market until recently.
NTCIP Wiper Operation
This operation was never implemented and no complaints were received until June, 2020.
FW release 7.72.0008
Contained camera block FW for video improvements for the MIC IP starlight 7100i and the AUTODOME IP starlight 7000i .
Contained the NTCIP Autofocus, Autoiris, and MIC wiper control implementation for all of the models.
FW release 7.80.0128.
Contains new camera block FW with additional video improvements for the AUTODOME IP starlight 7000i and still contains the camera block FW for the MIC IP starlight 7100i.
Contains new camera block FW with focus improvements for the MIC IP starlight 7000i and MIC IP fusion 9000i.
All of camera block FW updates require an additional step for the FW upgrade process, which is described in the documents attached.
The MIC IP starlight 7000i and MIC IP fusion 9000i focus improvements are only applicable to a specific S/N range, so there is a separate FW upgrade for these models.
This article describes how to create a Certification Authority (CA) signed certificates for multiple cameras and distribute the CA certificate to multiple workstations. The attached step-by-step description was created for setting up BVMS recording authenticity feature in large systems.
How to terminate a M12 connector for FLEXIDOME micro 5000 MP?
Both RJ45 and M12 plug connectors are available with IEC 11801:2002 Cat5 compliance. This further simplifies the concurrent use of both connector types within a single system. Assembly consists of three easy steps, none of which require specialist tools. The plug connectors, compliant with all standards and fully shielded against EMC interference, are available in four-pin and eight-pin configurations. They can be connected to flexible or rigid wires, with sizes ranging from AWG 26 to AWG 22. This makes the connectors suitable for all Industrial Ethernet transmission systems, Ethernet-based fieldbus systems such as Profinet, and EtherNet/IP up to gigabit speeds. The M12 Quickon connector provides a sturdy metal housing with a plug-and-turn mechanism. A 360 degree shielding connection with an iris spring means the connector is well suited to system environments with large amounts of EMC interference. The compact design of the RJ45 Quickon connector, on the other hand, makes it suitable for horizontal or vertical multi-port connection (as is frequently required by switches, for example). Connector ID rings are available in eight colors to visually aid patch-bay layout.