Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    100% helpful (1/1)
    ‎05-13-2021 03:45 PM
    Related Products Workstations, Z4G4, Microsoft License Question Is it possible to Activate Windows 10 by phone for Bosch Workstations? Answer With introduction of Windows 10, Microsoft disable the phone license activation for Bosch Workstations. Please perform online activation over internet.
    View full article
    ‎04-28-2021 03:22 PM
    This article shows how to configure Input Alarm and later search for them in the Event search using Web Interface. There are only 3 different search parameters for Event type search, which are "All", "Motion" and "Alarm". Once can search for any alarms during the set time period and channel and in this way indirectly to filter for Input Alarm (if only Input Alarm triggers Recording for a particular channel). It is not possible to directly narrow the search for particular Alarm type (ex. Input alarm).
    View full article
    ‎05-13-2021 03:39 PM
    Related Products: BVMS / MVS / VSDK Overview: On request from development to provide a dump file from MVS system please follow the steps in the solution section.   Step-by-step guide   Reproduce the issue Download the Microsoft debugger procdump (https://technet.microsoft.com/en-us/sysinternals/dd996900.aspx). The procdump tool is also attaced to the article :How To create BVMS memory dump?  When application is crashing, do not click any buttons on the appeared error window that will change the program state. Run the procdump.exe from the directory where you copied the tool with following command line (Start - cmd): procdump.exe –ma <name of the programm exe> <dump file name>.dmp   In the case of MVS you need to do that for all 4 MVS services: - Bosch.MVS.SourceProvider.BVMS.Service.exe - Bosch.MVS.DataStorage.Service.exe - Bosch.MVS.SourceProvider.MobileCamera.Service.exe - Bosch.MVS.Transcoder.Service.exe
    View full article
    ‎04-06-2021 09:11 AM
    Related Products: BVMS, application crash, memory dump This article lists the scenarios in which technical support normally request dump file from a BVMS system. It contains general guidelines how to create a dump file for BVMS system and provides links to more concrete articles, that correspond to particular issues and exact steps to create a dump. BVMS dumps are needed to troubleshoot the following types of issues: Application crashes – dump is expected to provide more information about the cause of the crash and its origin. Memory or handle leaks – dump is expected to point to their origins Deadlocks, freezes and hangs – dump is expected to point to their origins Recommended tool to create BVMS dumps. The recommended tool is Procdump. It is a command line tool which must be started from the command shell. Development provides couple of .bat files that start Procdump with predefined parameters and cover the most common dump creation cases. The tool as well as the set of .bat files are attached to this article: BVMS_DumpTools_V2.zip The batch file names follow a naming guideline: <Executable>_<Dump use case> , where <Executable> is one of: ConfigClient ConfigWizard OperatorClient ManagementServer ArchivePlayer ExceptionTest and <Dump use case> is one of SingleDump TwoDumps DumpOnException DumpOnHang ActivatePostmortemDebugging There are 3 possible error scenarios and corresponding dump creation methods: Dump creation for reproducible crashes that trigger Windows Error Reporting Run the affected application/service (Operator Client, Configuration Client or Management Server Service) Reproduce the steps that lead to the crash Leave the Windows crash dialog open Run the corresponding batch file for creating a single dump: *_SingleDump.bat. E.g. run OperatorClient_SingleDump.bat to create a single dump of the Operator Client process. Provide support with the resulting .dmp file a description of the steps to reproduce the problem ConfigCollection Note: attached you can find a configured example for this scenario and application Operator Client - BVMS_OC_dump_onException.zip Dump creation for reproducible memory or handle leaks Run the affected application/service (Operator Client, Configuration Client or Management Server Service) Run the corresponding batch file for creating two dumps: *_TwoDumps.bat. E.g. run OperatorClient_TwoDumps.bat to create two dumps of the Operator Client process. Note that by default, the delay between the two dumps is set to one hour (3600 seconds). Depending on the magnitude of the memory leak, you might want to increase/decrease the delay. To do that, edit file *_TwoDumps.bat: replace value "3600" by a value that fits your needs e.g. a value of "7200" will create two dumps with a delay of two hours. Reproduce the steps that lead to the memory leak. Wait until the second dump was created. Provide support with the resulting two .dmp files a description of the steps to reproduce the memory leak a ConfigCollection Dump creation for crashes/hangs/freezes that are hard to reproduce Deactivate the restarting option for Operator Client / Configuration Client: To deactivate the restarting option for Operator Client / Configuration Client: edit ..\Bosch\VMS\bin\ConfigClient.exe.config or ..\Bosch\VMS\bin\OperatorClient.exe.config. Navigate to section <appSettings> add a new entry <add key = "DisableExceptionHandling" value="TRUE" />. Run ActivatePostmortemDebugging.bat Run the affected application/service (Operator Client, Configuration Client or Management Server Service) As soon as the issue appears, check whether the dump was created. Provide support with the resulting .dmp file description of the steps to reproduce the crash ConfigCollection Note: attached you can find a configured example for this scenario and application Operator Client - BVMS_OC_dump_Just-In-Time-Debuger.zip
    View full article
    ‎04-29-2021 10:16 AM
      Related Products: VRM, Genetec Security Center Overview: It is possible to use VRM free of charge (no extra VRM license is required) within Genetec Security Center. Genetec is sending encrypted secret to the VRM server with the number of the licensed channels. When VRM receives and validates this, it can be used for that number of channels for 24 h. A periodic license update is send by Genetec, so the VRM licensing is guaranteed as long as it is used with Genetec Security Center. Default settings, if not extra configuration is needed or done. -License for 1000 Cameras - License update is done every hour   How to license more than 1000 cameras or change the license update period for VRM within Genetec Security Center: Open the Config Tool and Launch a Video Task Select the Archiver Go to the Resource Tab and click on Extensions From the Tab Installed extensions select Bosch. In the Tab VRM add a new VRM and/or select already configured VRM. Click on Advanced settings and add the following parameters If you need to license the system with more than the default 1000 licenses – create the parameter with Name VrmLicenseRequestCount and as value put the required number of licenses. The parameter name is case sensitive If you need to change the duration of the period between each license request (there is always one license request when the archiver starts) – create the parameter with Name VrmLicenseRequestPeriod. The duration of the period is in milliseconds. The default value is one hour. If the value is set to 0, the license request are disabled. The parameter name is case sensitive     Press Enter to confirm the entry and then Close Press Apply and then OK. At the webpage of the VRM one can check if the number of licenses is changed.                    
    View full article
    ‎04-29-2021 02:43 PM
    Upcoming with FW 7.10 and CM 6.20, Camera Trainer is a licensable Intelligent Video Analytics module that allows uses to define objects of intereste and train their own detectors for them based on examples of target objects and non-target objects. In contrast to the moving objects detected in general by IVA 7.10, Camera Trainer allows detection of both moving and non-moving objects, separates and immediately classifies them. Training can be done both on live video as well as on recordings available through the respective camera. The resulting detectors can be down- and uploaded for distribution to other cameras.
    View full article
    100% helpful (1/1)
    ‎04-29-2021 10:40 AM
    Related Products: BVMS SDK, BVMS    Overview: BVMS Scriptlets can be debugged via logging to a logger file or messaging to the Operator workstation. This article describes how to enable BVMS Scriplet logging. You can log to the Server Script log or the Client Script log. Logs are default send to C:\ProgramData\Bosch\VMS\Log   1.Creating Log files ClientScriptLogger – automatically created Creates file “ClientScriptLog.txt” ServerScriptLogger - automatically created  Creates file “ServerScriptLog.txt”   2.Log information to the log files There are 3 methods to log information: Log Info Log Error Log Debug   Examples: [Scriptlet("59c4d66e-9395-4dcc-8d27-90dc2b7a00c4")] public void DemoLogger() { //use refence:C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727 MessageBox.Show("Hello World"); Logger.Info("Hello World script started"); Logger.Error("Hello World script started"); Logger.Debug("Hello World script started"); // Not writing to ClientScriptLog.txt ! }   3.Logging Location - C:\ProgramData\Bosch\VMS\Log. The logs are automatically collected by the BVMS Configuration Collection Tool. 4.Changing the location of the BVMS Scriplet Logging.   Server Scripts : Logging Directory can be found in the file: C:\Program Files (x86)\Bosch\VMS\AppData\Server\CentralServer\BvmsLogCfg.xml and is defined by the ServerScriptLogAppender path: Default: </appender> <appender name="ServerScriptLogAppender" type="Bosch.Vms.Shared.Logging.Imp.RollingFileAppender, Bosch.Vms.Shared.Logging.Imp"> <file value="%CommonApplicationData%\\Bosch\\VMS\\Log\\ServerScriptLog.txt"/>   Client Scripts : Logging Directory can be found in the file: C:\Program Files (x86)\Bosch\VMS\AppData\Client\OpClient\ApplicationWiring\Nvr\LogCfg.xml and is defined by the ClientScriptLogAppender path: Default: </appender> <appender name=“ClientScriptLogAppender" type="Bosch.Vms.Shared.Logging.Imp.RollingFileAppender, Bosch.Vms.Shared.Logging.Imp"> <file value="%CommonApplicationData%\\Bosch\\VMS\\Log\\ClientScriptLog.txt"/>
    View full article
    100% helpful (1/1)
    ‎04-05-2021 12:09 PM
    Collect Video SDK Logs for VSDK based applications:
    View full article
    2 weeks ago
    In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket.   Related Products: BVMS SDK, BVMS    Overview: Analyzing BVMS systems with SDK components is a challenging task, because the functionality and the runtime behavior of those systems are harder to determine than for a BVMS systems without SDK functionality. In order to troubleshoot BVMS systems with SDK components support needs the following information and logging. Please prove the following information to support:   Symptom specific Information   Problem Description SMA validity How to retrieve the Hardware ID for BVMS and check the Software Maintenance Agreement (SMA) status? BVMS stand alone or appliance Detailed description of the expected behavior of the SDK functionality. Detailed description of the actual behavior of the SDK functionality.   SDK Components What type is the standalone SDK application (based on ClientSDK, ServerSDK, or CameoSDK) and on which machine is it running? Are there additionally client scripts, server scripts or workstation startup scripts?   SDK Interactions Do SDK components interact with remote Operator Clients? Do SDK components interact with the Operator Client UI? Do SDK components control devices? How often are client scripts triggered? How often are scripts triggered by BVMS event?   Environment Which shared resources are accessed by SDK actions? (Dome cameras, AMG, Operator Client UI) Do SDK components interact with an unreliable environment? (Unstable network, offline devices, offline PCs, etc.) Do SDK components properly handle offline situations? (offline devices, configuration changes, etc.)    Logging Information Please provide the Scriplet and/or Log files The optimal approach is to provide both the scriplet and logging. ClientScript logfiles: can be found in the ConfigCollection of Operator Client machines. ServerScript logfiles: can be found in the ConfigColletion of Management Server machines.   Make sure that logging is implemented in the script and that logging is activated in the configuration.  
    View full article
    ‎06-08-2021 09:11 AM
    In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket. Related Products: BVMS SDK, Cameo SDK, BVMS  Overview: Analyzing BVMS systems interaction with BVMS SDK based application is a challenging task. One needs to determine if the issue is based on wrong implementation of the BVMS SDK functionality, wrong programming practices, functionality and runtime behavior of BVMS system with SDK functionality or BVMS SDK issues. In order to troubleshoot BVMS SDK or Cameo SDK application support needs the following information and logging. Please prove the following information to support:   Symptom specific Information   Problem Description SMA validity How to retrieve the Hardware ID for BVMS and check the Software Maintenance Agreement (SMA) status? BVMS stand alone or appliance Detailed description of the expected behavior of the SDK functionality. Detailed description of the actual behavior of the SDK functionality.   SDK Components What type is the standalone SDK application (based on ClientSDK, ServerSDK, or CameoSDK) and on which machine is it running? Are there additionally client scripts, server scripts or workstation startup scripts?   SDK Interactions Do SDK components interact with remote Operator Clients? Do SDK components interact with the Operator Client UI? Do SDK components control devices? Do SDK components link to 3rdParty devices or applications?   Environment Which shared resources are accessed by SDK actions? (Dome cameras, AMG, Operator Client UI) Do SDK components interact with an unreliable environment? (Unstable network, offline devices, offline PCs, etc.) Do SDK components properly handle offline situations? (offline devices, configuration changes, etc.)    Logging Information   Please provide source code and/or Log files The optimal approach is to provide both source code and logging for the problematic BVMS SDK application. If it is not possible to provide the code, we will start the troubleshooting process based only on the logging. Source Code Provide a little sample application that illustrates the BVMS SDK issue and list the reproduction steps. Logfiles Add log outputs to the SDK application functionality. The logs should illustrate which BVMS SDK functionality was called at which time. Provide the logs to support. How to collect Video SDK log files?   List of Typical Mistakes that are often seen when troubleshooting BVMS / Cameo SDK based applications   Use of Thread. Sleep() in event handlers - Consequence: loss of events in customer SDK application. Implementations that are not thread safe - Consequence: unexpected SDK application effects Unintentional introduction of multithreading issues by using timers - Consequence: unexpected SDK application effects Application without "speed control" - Consequence: operator overload in case of high event frequency Lack of configuration change handling - Consequence: data inconsistencies in SDK application (access to no longer existing devices) Lack of traces/logging in SDK code - Consequence: not detected malfunctions and troubleshooting difficulties Lack of error tolerance in SDK code - Consequence: unhandled exceptions in SDK application / script Lack of exception handling - Consequence: SDK application crashes
    View full article
    100% helpful (1/1)
    ‎04-29-2021 02:20 PM
    Related Products: Video Analytics for Firmware 6.60 and above This article covers traffic monitoring of Bosch Video Analytics with How to Videos (one already available and one in planning) Default scenario of wrong way detection Learn how to use the default scenario of wrong way detection: A predefined scenario that can be used to detect an object that is traveling the wrong way.   Default scenario traffic incidents This predefined scenario is designed to detect common traffic incidents on roads: Wrong way – triggers an alarm if object travels in wrong direction Pedestrian – triggers an alarm if pedestrian is on the road Slow vehicle – triggers an alarm if vehicle moves slower then predefined speed. Stopped vehicle – triggers an alarm when vehicle is stopped longer than predefined time span. Dropped object – Triggers and alarm if an object is dropped on the road   This how to video shows in detail how to use the predefined tasks Wrong way, Slow vehicle and Stopped vehicle.   Note: If needed you can get additional how to information on camera calibration.  
    View full article
    ‎04-29-2021 10:49 AM
     Related Products: Video Analytics for Firmware 6.60 and above This article describes how to count with Bosch Video Analytics with How to Video and a Technical Note on the topic. View the video to get initial idea how to set up the feature, short explanations on the prerequisites and an example configuration.    For in depth description of the feature counting please check the attached Technical Note. It provides background information and technical details and can support you to configure and optimize a particular counting scenario.  How to Video: People counting default scenario Learn how to configure the default scenario - People counting: A predefined scenario that can be used to count people that are crossing a specified / specific line.   Technical Note on Counting The attached document describes in depth the count feature of Video Analytics. It explains how to plan the camera perspective and best practices for camera view, the set up for the scenario people counting and the options to access the counter data.   Note: If needed you can get additional how to information on camera calibration.
    View full article
    ‎04-29-2021 03:46 PM
    Related Products: Video Analytics for Firmware 6.60 and above Technical Note on Intrusion Detection The technical Note  attached to this article contains detailed technical description of Intrusion Detection, set up guidance for different usage scenarios and best practices. It is useful to get in depth knowledge about Intrusion detection or to find the answer of frequently asked questions.   Intrusion detection without calibration Learn how to use the default scenario - Intrusion detection no camera calibration: A predefined scenario that can be used to detect intruders in small areas and controlled environments Intrusion detection one field   Learn how to use the default scenario - Intrusion detection one field: A predefined scenario that can be used to detect intruders in small areas. Intrusion detection two fields   Learn how to use the default scenario - Intrusion detection two fields: A predefined scenario that can be used to detect intruders in large outdoor areas.  Note: If needed you can get additional how to information on camera calibration.
    View full article
    ‎05-20-2021 10:47 AM
    Question   Where can you find the ISO image for recovery of DIVAR IP 7000R2 and DIVAR IP 6000R2?   Answer   Related Products: DIVAR IP 7000R2 and DIVAR IP 6000R2   CTN Description   DIP-6180-00N  DIVAR IP 6000 2U W/O HDD  DIP-6183-4HD  DIVAR IP 6000 2U 4X3TB  DIP-6183-8HD  DIVAR IP 6000 2U 8X3TB  DIP-6184-4HD  DIVAR IP 6000 2U 4X4TB  DIP-6184-8HD  DIVAR IP 6000 2U 8X4TB  DIP-61F0-00N  DIVAR IP 6000 3U W/O HDD  DIP-61F3-16HD  DIVAR IP 6000 3U 16X3TB  DIP-61F4-16HD  DIVAR IP 6000 3U 16X4TB  DIP-7180-00N  DIVAR IP 7000 2U W/O HDD (R2)  DIP-7183-4HD  DIVAR IP 7000 2U 4X3TB (R2)  DIP-7183-8HD  DIVAR IP 7000 2U 8X3TB (R2)  DIP-7184-4HD  DIVAR IP 7000 2U 8X3TB (R2)  DIP-7184-8HD  DIVAR IP 7000 2U 8X4TB (R2)  DIP-71F0-00N  DIVAR IP 7000 3U W/O HDD (R2)  DIP-71F3-16HD  DIVAR IP 7000 3U 16X3TB (R2)  DIP-6704-HD 4000GB HDD DIVAR IP 6000/7000    For recovery of DIVAR IP 6000 R2 or DIVAR IP 7000 R2 one should use only the DVD provided with the particular device. Do not use the DVD for recovery if you are not sure that it is the one delivered with the system. In case the DVD is lost or damaged request the respective ISO image from Bosch Technical Support.  Solution:  Request the ISO image from Bosch Technical Support:   Provide the Serial Number of the device Issue description: What is the reason for the recovery Why it is not possible to use the recovery DVD   Note: This article will guide you through the recovery steps of a DIP:  TSG: Rebuild broken OS RAiD on DIVAR IP 6000, DIVAR IP 6000 R2, DIVAR IP 7000, DIVAR IP 7000 R2
    View full article
    100% helpful (1/1)
    ‎04-29-2021 11:09 AM
    This Video should help you to understand, what calibration means, why and when to calibrate the cameras.
    View full article
    100% helpful (1/1)
    ‎04-05-2021 04:17 PM
      How to identify Hardware errors based on beep codes Relates to: IP Storage/PC HW - DIVAR IP 6000 R2 and DIVAR IP 7000 R2 Both DIVAR IP units running the BIOS from American Megatrends Inc. (A.M.I) There are PRE BOOT or POST BOOT beeps. Please see the following Acoustic Error Codes. Short Beeps Beeps BOOT Description Possible Root Cause 1x short PRE Ready to Start No error   2x short PRE + POST Can´t restore Parity RAM 3x short PRE Errors in the lower memory block (first 64 Kbytes) RAM 4x short PRE System-Timer error Motherboard 5x short PRE Processor malfunction CPU 6x short PRE No RAM installed RAM 7x short PRE Exception interrupt error CPU 8x short PRE Display memory error Graphic card 9x short PRE CMOS/ROM checksum error CMOS battery, CMOS 10x short PRE CMOS read error Motherboard, CMOS-Clear-Jumper 11x short PRE L2 Cache malfunction Cache, CPU or Motherboard Repeated short PRE + POST Problem with the power supply to the motherboard Motherboard Long Beeps Beeps   Description Possible Root Cause 1x long PRE + POST Power Supply error Power Supply or Motherboard 3x long PRE Error in keyboard interface Motherboard Repeated long PRE + POST Power Supply Malfunction: To high or low voltage Power Supply or Motherboard Beep Combinations Beeps   Description Possible Root Cause 1x long + 1x short PRE Fatal Error on the Mainboard Motherboard 1x long + 2x short PRE + POST Video Problem Graphic card malfunction or wrong installed 1x long + 3x short PRE + POST Video Error Broken RAM-DAC (Digital Analogue Converter) 1x long + 6x short PRE Keyboard-Controller malfunction Keyboard 1x long + 8x short PRE Video Memory malfunction RAM on the graphic card 1x long + 9x short PRE ROM-BIOS-Checksum error ROM-BIOS (Battery or Motherboard error) 2x long + 2x short PRE + POST Video error Video-ROM error or video graphic malfunction 3x long PRE Keyboard-Interface or RAM malfunction Motherboard or RAM 3x l + 3x s + 3x l PRE + POST RAM malfunction RAM
    View full article
    100% helpful (3/3)
    Tuesday
    The Release Letter for CPP 7.72.1118 provides information about the dependencies between firmware versions for a better understanding of the upgrade process of devices with older firmware.
    View full article
    ‎04-05-2021 04:42 PM
    From BVMS 10.0 onwards BVMS is an ONVIF Profile S conformant client. Cameras which are listed as Profile S compliant product on the ONVIF website are supported based on the ONVIF Profile S functionality. In the table below you can find an overview of the tested and supported ONVIF cameras for BVMS.   Version List of tested cameras BVMS 7.5 BVMS 7.5 list of tested ONVIF cameras  BVMS 8.0 BVMS 8.0 List of tested ONVIF cameras  BVMS 9.0 BVMS 9.0 List of tested ONVIF cameras  BVMS 10.0 BVMS 10.0 List of tested ONVIF cameras  BVMS 10.0.1 BVMS 10.0.1 List of tested ONVIF cameras  BVMS 10.1 BVMS 10.1 List of tested ONVIF cameras    The table below shows in which situation a specific camera can be connected to BVMS and is supported. BVMS version BVMS 9.0 and older BVMS 10.0 and newer ONVIF Profile S compliant camera Yes Yes Yes Yes BVMS tested camera Yes No Yes No           Supported camera Yes No Yes Yes   For BVMS version 10.0 and above, please make sure to go through these steps: Please check the List of tested cameras. If the device is not listed in the List of tested cameras, then please check   here   and make sure that your device is ONVIF Profile S compliant. If your camera is not listed in the tested cameras and is not listed on the ONVIF website as Profile S conformant, we cannot help you when you have an issue with this device. You should approach the device manufacturer to certify the device as ONVIF Profile S conformant. For example, if you have an   Axis camera, M1004 model, please fill in your product details in the Application Type, Profile(s), Manufacturer and the Product Name fields, under the   Product Search   option, and press on the “Search” button: 3. If your device is ONVIF profile S compliant you can contact Bosch Central Technical Support and request assistance. Additional information: Cameras listed as tested are owned by Bosch and issues can be fully investigated by Bosch. Cameras not listed as tested are not owned by Bosch. Solving issues might take longer as it requires collaboration with the camera vendor. Bosch support teams might need to refer to the camera manufacturer’s support line to help fixing the issue. We consider the firmware listed on the ONVIF website as the minimum firmware version of a camera. Please let us know if you run into issues with newer firmware versions so that we can investigate those accordingly. If the problem is a firmware regression, we might need to refer you to the camera manufacturer for support.
    View full article
    Tuesday
    RTSP and multicast streaming There are different ways for a client to receive a multicast stream: the client can connect to the camera and request a multicast stream. In this case you would see a connection in the dashboard. If not checked, it requires at least one connected client to have the camera provide the stream into the multicast group. Clients who just joined would receive no stream if there is no client connected. the client can join an existing multicast stream without connecting to the camera. It must know the multicast group. You would not see this client on the dashboard. The streaming flag tells the camera if it should feed its stream into this multicast group, regardless of a connected client. This is an option if there are many, many clients possibly connecting to the same camera/stream. There is no difference in data amount if streaming is checked or not as long as there is at least one multicast client connected to this multicast group. Below you find a way how to pass a special connection string to request a multicast stream via RTSP from a BOSCH IP camera or IP encoder.
    View full article
    Thursday
    A transfer of the license from the Bosch Software License Manager System (SLMS) to the Bosch Remote Portal is required for every BVMS system to be upgraded from 10.1 to 11.0 Starting with BVMS 11.0 the license activation will be done via the Bosch Remote Portal. To upgrade an existing system, the BVMS licenses need to be migrated from the old licensing system, Bosch Software License Manager System (SLMS), to the new licensing system available in Bosch Remote Portal. This article describes the steps that need to be followed when upgrading a system to BVMS 11.0. Prerequisites for upgrading a system to BVMS 11.0: Existing license activated in SLMS Valid Software Assurance (SMA) PRO Valid account on Bosch Remote Portal   ❗ ❗ ❗  IMPORTANT In BVMS 10.x the computer signature is the link to the license in the SLMS When upgrading to 11.x the computer signature becomes obsolete and the new Remote Portal tool no longer takes it into consideration The software Order ID is transferred in the background from SLMS to the Remote Portal This allows the activation of BVMS 11.x in the Remote Portal using the new identifiers for the Management Server Hardware called System Fingerprint, contained in the System Info file.
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist