Security: Video

If the image quality of AUTODOME 7100i camera is opaque and dark, especially during winter conditions when the majority of the viewing area is covered with white snow and there is cloudy day weather with no direct sunlight, you can improve the image quality by following this article.

This article is a step-by-step guide about how to downgrade the firmware of DINION inteox 7100i IR (CPP13) from v8.91 to v8.45 (Error 111)?

This article is a step-by-step guide  about howto configure IVA Pro Privacy for face detection, blur, and anonymize moving/stationary objects.

Find out from this article the cause and possible solutions for status 4 and status 6 messages occurred on MIC IP FUSION 9000i camera.

This article explains how enabling electronic image stabilization (EIS) on CPP14 cameras affect privacy masks. As soon as the "electronic image stabilization" (EIS) is set to on, the image section changes slightly, which changes the placement of the privacy mask.

This article explains how to set up a custom tour for Bosch cameras and finally making the custom tour accessible in the BVMS Operator Client.

This issue typically arises when you have installed an incorrect version of BVMS.

Bosch Security Systems is a leader in advanced camera-based video analytics, offering unparalleled detection accuracy and speed through on-camera processing. This approach not only accelerates analytics performance but also eliminates the need for additional on-site server hardware, providing significant cost and operational efficiencies.

You can export any single favorites item, folder or the complete favorites tree. You can then share the exported file or files with other users or upload it on your workstations.

It is not recommended to use a bridged NIC configuration for ONVIF cameras integrated in the VSG Server with BVMS.

This article is a step-by-step guide on how to set focus position on MIC IP starlight 7100i camera (focus to a certain setpoint).  

Please note that this is not a bug, this behavior is as designed. Passwords are no longer stored in the config file. Therefore, a new password must be entered.

This article answers whether the FLEXIDOME Multi 7000i camera consumes 4 licenses in BVMS. From BVMS 11.1 and newer version, the FLEXIDOME Multi 7000i camera is using only 1 license (including 4 channels). For BVMS lower than 11.1, then it will consume you 4 channel licenses.  

This article explains how to use Milestone's Centralized Search with different Bosch IVA Pro packs.

This article answers whether the DINION IP Starlight 7000 HD camera (NBN-73023-BA) can be set to corridor mode for narrow spaces like hallways and explains why this model doesn't support a 90-degree rotation setting.

This article explains what to do when ‘Authentication failed’ message appears in VSC 3.7.0.817 for CPP4 cameras: To resolve this issue, upgrade the Video Security Client to version 3.7.1.840. According to the Release Notes (page 2), this version fixes the authentication failure with legacy cameras (CPP4) . 

This article answer the question if DINION 5100i IR (NBE-5702) is supported by Milestone XProtect VMS. The Milestone Supported Device List shows the DINION 5100i IR (NBE-5702) camera as being supported with tested Firmware version 9.10.0192*.

This article explains which plug-ins to use for Bosch cameras integrated with Milestone.

This is a step-by-step guide about how to collect BMC logs (RAID & IPMI Event Logs, System, Audit & Video Logs) of DIP AIO 7000 gen4.

This article explores whether BVMS licenses can be transferred from version 8.0 on DIP 7000 R1 to DIP 7000 R2 for version 9.0.