Security: Video

This article will redirect you to the instructions about how to replace HDDs in the NetApp DSA E2800 unit

This article explains how is the storage capacity calculated for DSA E-Series E2800 12-bay (RAID 6).

Redundant network connection to a NetApp array can be configured with virtual interface. NetApp provides tree different types of virtual interfaces (VIF). Check this article and find more details!

This is a living document and the list will be constantly updated. Details can also be found in the BOSCH Product catalogue:

This article provides causes and solutions regarding Netapp E2800 periodically disconnections.

This article presents what should we check first if Channel 5 & 6 of DSA E2800 are showing as disconnected: Verify if the expansion slots are connected correctly (page 21) Afterwards, wait a few minutes until they load up, and only then start the DSA S2800. Now, you can check in the Configuration Manager to see if the IP addresses need to be changed. Once you verify that they are correct, you can add the Device in Configuration Client.

Port 3260 is used on iSCSI ports. Control-ports require 2463, 50889, 161, 162, 80 and 443 to be accessible.