Security: Video

BVMS - Automatic login of Operator Client: The BVMS Operator Client can be automatically logged in by using parameterized startup.

The pop-up dialog window message: "Setup has detected a pending restart.  Please reboot the system and rerun the installation"  appears when attempting to run the valid BVMS windows installer package.

This article lists how to configure ANR feature in BVMS and how to set up correctly the iSCSI and direct replay. 

The digital monitor wall functionality was removed since BVMS v11.0, and this is also stated in the release notes.

If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.

In order to increase system security in BVMS, it is recommended to set the Global CHAP password. This article contains the configuration steps for an existing fully operational BVMS 11.x system with no CHAP password configured.

This article explains what can you do when ‘Authentication failed’ message occurs when accessing VSG in BVMS v11.0

This article explains step by step how to play exported recording files from VRM eXporter Wizard in BVMS Export Player.

This article provides an answer to the question: Can I install Intelligent Insights into DIVAR IP all-in-one 5000?

There is an issue with VRM versions lower than 4.0 where the retention time for recordings from VSG instances is set incorrectly. There are a few things that usually cause the recording mode to be set incorrectly. Find out more details from this article!

This article presents what symptoms appear in BVMS Operator Client if Time synchronization is wrongly set. Also provides some recommendations about what to do to avoid this symptoms. 

This articles explains what does the User Name column indicate in the BVMS Operator Client LogBook.

Find out from this article what you should do to fix green Image panes in BVMS

The Project Assistant offers two ways of importing existing project data Importing a .bpassist file or importing from a tab-separated text file

Can I display more than 1 camera on a single Monitor of Decoder VJD-7513 in BVMS 11.0 when an alarm is triggered?   System Overview: BVMS 11 1 monitor connected to 1 x VJD-7513 that is part of a Monitor Group The monitor has a layout consisting of several image panes Desired status: when an alarm is triggered → pop up the image of the 4 cameras on the same decoder monitor

This article contains a step-by-step guide which explains how you can do the setup for the camera's live view image pane to be displayed in full screen in the Operator Client if a motion alarm is triggered on that camera,

Find out from this article how many cameras can be opened before the workstation is overloaded.

Windows 11 Pro is now officially supported as OS for BVMS 11.1.1 Operator Client

 This article shows the keyboard shortcuts that can be used by operators when operating the BVMS system. 

Starting with BVMS 10.0, ONVIF encoder events can be retrieved from VSG or ONVIF encoder directly. Additionally to ONVIF profile S, BVMS 10.0 supports ONVIF profile T.