Security: Video

In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket.   Related Products: BVMS, Operator Client This article describes the initial information needed to start troubleshooting Operator Client Crash.   General Information   SMA validity How to retrieve the Hardware ID for BVMS and check the Software Maintenance Agreement (SMA) status? BVMS stand alone or appliance Detailed problem description   Symptom specific Information Problem Description   Note down the events that lead to crash Classify the crash reproducible crashes that trigger Windows Error Reporting crashes/ hangs/ freezes that are hard to reproduce, or take long before repeating   Logging Information   Dump file from the crash – refer to the following article How To create BVMS memory dump?  ConfigCollection from the machine where the crashing Operator Client is running.

Question   Why the Windows license key and System ID are the same on all my DIVAR IP 6000?   Answer   These units come pre-licensed from the factory and they have an OEM (Original Equipment Manufacturer) license activated. Please see more information about OEM on the Wikipedia link below:  https://en.wikipedia.org/wiki/Original_equipment_manufacturer According to its datasheet, all components relevant to the usage of DIVAR IP 6000 as storage array in a Bosch recording solution are pre-installed and preconfigured. Simply connect to the network and power the unit up — DIVAR IP 6000 is ready to begin recording straight out-of-the-box.

In Cloud-based Services, different 'Actions' can be configured for automatic processing as well as manual action for the operators (Alarm Agents). There are 2 different options how an action is processed: An 'Automatic Action' is processed automatically when the related Service Scenario is performed. An 'Intervention Action' is executed manually by an operator from the Cloud-based Service Operator Interface. This note shows available actions in Cloud-based Services and provides a step by step instruction to configure these actions.   Step-by-step guide   1. Send e-mail "Send e-mail" sends an e-mail notification to the configured recipient(s). The action can be used as manual action for the operators (Intervention Action). The content of the alarm email can be configured to the customer's needs.   To configure a "Send e-mail" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account. 3. Click tab 'Actions'. 4. Click '+' button to add an action. 5. Give the action a descriptive name and select 'Email'. 6. Type recipients, CC's, mail subject and message. Use the pull down to enter environment variables to the e-mail text. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing.   2. Execute PTZ Command "Execute PTZ Command" starts an auxiliary command on a Pan-Tilt-Zoom (PTZ) camera. The action can be used for automatic processing (Automatic Action) as well as manual action for the operators (Intervention Action). Note the available auxiliary commands in the camera’s manual. To configure an "Execute PTZ Command" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account. 3. Click tab 'Actions'. 4. Click '+' button to add an action. 5. Give the action a descriptive name and select 'Execute PTZ Command'. 6. Select PTZ camera, select auxiliary command and type the command No. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing   3. Go to PTZ Preposition "Go to PTZ Preposition" moves a Pan-Tilt-Zoom (PTZ) camera to a preposition. The action can be used for automatic processing (Automatic Action) as well as manual action for the operators (Intervention Action). The prepositions (shots) need to be configured via the Device Page upfront. To configure a "Go to PTZ Preposition" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account. 3. Click tab 'Actions'. 4. Click '+' button to add an action. 5. Give the action a descriptive name and select 'Go to PTZ preposition'. 6. Select PTZ camera and type the preposition No. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing.   4. Play Audio on Device "Play Audio on Device" replays an audio file directly from the device's loudspeaker. The action is intended to perform standard audio interventions without the need for the operator (alarm agent) to talk. "Play Audio on Device" can be used for automatic processing (Automatic Action) as well as manual action for the operators (Intervention Action). Audio files need to be prepared and installed by CBS development. If you want to use your own audio files, please get in contact with technical support. To configure a "Play Audio on Device" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account. 3. Click tab 'Actions'. 4. Click '+' button to add an Action. 5. Give the Action a descriptive name and select 'Play audio on device'. 6. Select the audio device and select the audio file. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing.   5. Switch Relay "Switch Relay" switches a relay of one or more IP devices. The action can be used for automatic processing (Automatic Action) as well as manual action for the operators (Intervention Action). To configure a "Switch Relay" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account 3. Click tab 'Actions'. 4. Click '+' button to add an action. 5. Give the action a descriptive name and select 'Relay'. 6. Select activation mode and select one or more relays to switch. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing.   6. Notify Monitoring Center and Log Event Both action types "Notify Monitoring Center" and "Log Event" are obsolete and can not be used in a Service Scenario.  See also: How to add a user to Remote Alert service in Remote Portal?

Related Products Workstations, Z4G4, Microsoft License Question Is it possible to Activate Windows 10 by phone for Bosch Workstations? Answer With introduction of Windows 10, Microsoft disable the phone license activation for Bosch Workstations. Please perform online activation over internet.

Related Products: BVMS / MVS / VSDK Overview: On request from development to provide a dump file from MVS system please follow the steps in the solution section.   Step-by-step guide   Reproduce the issue Download the Microsoft debugger procdump (https://technet.microsoft.com/en-us/sysinternals/dd996900.aspx). The procdump tool is also attaced to the article :How To create BVMS memory dump?  When application is crashing, do not click any buttons on the appeared error window that will change the program state. Run the procdump.exe from the directory where you copied the tool with following command line (Start - cmd): procdump.exe –ma <name of the programm exe> <dump file name>.dmp   In the case of MVS you need to do that for all 4 MVS services: - Bosch.MVS.SourceProvider.BVMS.Service.exe - Bosch.MVS.DataStorage.Service.exe - Bosch.MVS.SourceProvider.MobileCamera.Service.exe - Bosch.MVS.Transcoder.Service.exe

The Windows Storage Server operating system of DIVAR IP all-in-one 7000 is installed on a two SSD drives in redundant (mirrored) configuration. Health status of the mirrored OS drives can be monitored using a tool called Virtual RAID on CPU (formerly known as Rapid Storage Technology). Installation and configuration steps are described below. Step-by-step guide   1. Installation: Download the setup from here Copy the content to a USB drive When the BVMS default screen is shown, press CTRL + ALT + DEL Hold down the SHIFT key while clicking Log off Log in as BVRAdmin Transfer the IATA_CD.exe from the USB drive to the BVRAdmin desktop Double click the IATA_CD.exe executable Follow the installation procedure as shown in the screen shots     2. Email notification: Note: The E-mail notification feature is based on SMTP access without authentication. It is strongly suggested to use this functionality only with a dedicated server in the local network, which is specifically configured for this purpose and doesn’t handle any critical data.

If you want to control the camera from a DIVAR wired through a VJD 3000, you have to configure the VJD and the DIVAR as well. Below you will find the steps which will help you to set up your devices.

Question Why I cannot see my camera in the Logical Tree from Operator Client? Answer Please make sure that you have done all the steps below accordingly. Normally, to be able to view a camera in the Operator Client, you need to: Go to the Maps and Structure tab from Configuration Client. Drag and drop the camera in question from the Device Tree to the Logical Tree. Save and Activate the changes. This step is very important because otherwise, you will not be able to see the changes in Operator Client, even though the first 2 steps were carried out in Configuration Client.

This article explains how to find and calculate the specific size of BVMS logs on your server when the log starts to overwrite your own data.

Various overlays in the video image provide important status information. But what does mean the blinking play button near the yellow exclamation icon?

This article provides an overview of Operator Client (BVMS 10.0.1) for most used functionality for security operators and incidental users.

This article provides you the way you can set the VIDEOJET decoder 8000/ 7000 (VJD-8000/ VJD-7513) to factory default. Article requirements: VIDEOJET decoder 8000/ 7000 Keyboard monitor

This article helps you to solve the situation where the "No Config" error message appears when you try to authenticate in Operator Client. This error can be persistent, no matter what central server you attempt to login to and no matter what user account or credentials you are trying to use. This means that you have a corrupt cache .dat file on your system. Follow the steps from this article if you attempt to login into BVMS Operator Client and encounter the message below and you want to fix it: "Please enter your credentials... No config..."

When working with previous versions of BVMS, remote connectivity was cumbersome due to the amount of port mapping that needed to be configured. BVMS 7.5 provides a new method of remote connectivity utilizing Secure Shell (SSH) Tunnelling. SSH Tunnelling constructs an encrypted tunnel established by an SSH protocol/socket connection. This encrypted tunnel can provide transport to both encrypted and un-encrypted traffic. The Bosch SSH implementation also utilizes Omni-Path protocol, which is a high performance low latency communications protocol developed by Intel. Key management The BVMS SSH service generates a private and public key when it is started for the first time. Both keys are saved in an encrypted file. When the BVMS SSH service restarts this file is detected and the private key is read.   Step-by-step guide   1.Configuration   A. Installation There is little to no configuration required for this feature to function. The SSH Service must be installed and running. If deploying a BVMS Pro system, insure the SSH Service is part of the installation process. Recording Appliances that ship with BVMS 7.5 should have the service pre-installed. Check your “Services”. If the service has not been installed, the install package can be run from the BVMS 7.5 downloadable install package. If working with a DIVAR IP Recording Appliance, the appliance “Installer Package” must be used.   B. Port mapping entry The primary configuration step is to configure one (1) port forwarding for the BVMS Central Server to utilize port 5322 for both internal and external connections. This is the only port mapping entry that needs to be made for the entire system. The image below shows a sample configuration.   2. Operation   A. Login with the Operator Client After the basic configuration is done, logging in via Operator Client is very intuitive: From the log menu, select the “Connection” drop down menu, then Select <New…> You will be prompted to enter an IP address or DNS host name. You will also notice a cheat guide below the entry menu that will assist with address entry. Addressing must be in the following format: ssh://IP or servername:5322. In the example we used: ssh://49.49.49.49:5322. After entering a properly formatted address, enter a valid user name and password. SSH users MUST have a password associated with their BVMS account. User accounts without a password cannot log in utilizing an SSH Connection.   B. Verification After connection is established via an SSH Tunnel, all communications between the BVMS Server (192.168.1.19) and a remote client (49.49.49.48) are encrypted. Below is a Wireshark Capture taken from the BVMS Server after a connection is established. C. Changing the SSH port Locate the SSH service configuration file in "C:\Program Files\Bosch\BVMS\bin" Open the configuration file and find the section below. Edit the value of the BvmsSshServicePort (the port should be unused) and restart the system.

This article explains how to set an Unconfigured Bad Drive to Unconfigured Good on a DIVAR IP 6000/ 7000. This step is required if the new drive is not listed under Unconfigured Drives. A possible reason for the Unconfigured Bad status is when a device that has not been removed properly is reconnected to the controller.

Do you want to configure the 3rd party iSCSI storage with different LUNs for recording more cameras without Bosch VRM? This article explains you if this application is supported.