Security: Video

This article contains the information about the default path where  the recordings of Bosch Video Client are set.

BVMS OPC server restricts the use of some symbols in the camera names

You should only subscribe directly to this article (Option 1) or to the software_release_notification label (Option 2) and you will receive a notification in your inbox every time when a new Software version is released and added to the lists within this article.

Starting with BVMS v10.0, you can leverage VRM Encryption Technology.

Glutton (German: Vielfraß) defines and prevents a camera or multi-channel encoder from mounting and consuming  a large number of  blocks in a very short time.

If replacing a defective camera, the camera must be the same IP address as the defective device, and it cannot contain a GUID from a different VRM.

The configured camera TCP port is used from the BVMS Operator Client to the camera. This port is used by the BVMS Operator Client as a destination port. The source port is dynamic and therefore, it cannot be adjusted.

Hash Tag "#" is one of the few special characters, which is accepted by the camera, but it cannot be accepted on BVMS side (in order to connect to the camera) — due to the limitations of communication specifics some BVMS components are using. And as a result, communication might not work properly and "No connection" warning message in Operator Client image pane and black screen might occur

This behavior occurs when you have requested the SMA extension and you didn't upload the Activation file in the BVMS Configuration Client.

When integrating Intelligent Insights with a self-signed certificate, the BVMS operator client always shows an error message when opening a widget in the BVMS operator client image pane. Find out from this article how to solve this behavior!

If you forgot the password of your BVMS — Bosch Video Management System and you want to reset its password, the Central Technical Support Team can help you.

By extracting the playback in the MOV or MP4 format using BVMS Operator Client, the video is split into multiple files and not in a single file/ segment. This behavior became visible after upgrading BVMS to version 11.1.1.65.

This article answers the question:  Is there a search limit of results in BVMS Operator Client Logbook for collecting license plate data?

This article presents possible causes and solution regarding no recording for cameras added to VRM (DIP 7000AIO): ‘Unexpected error’ in BVMS Config Client

The UDP tunneling cannot be configured on BRS. Network cards are grayed out.

This article is a step-by-step guide about Video View License activation process.

This article presents which are the new features in Video Security 3.4 for Windows, Android and iOS.

Follow this article and download the Bosch Data Security Guidebooks attached

This article shows what to do in case the following message occurs: "Could not add the following devices"  when adding IP cameras FW 7.87  to BVMS 12.0.

At some point, the Central Technical Support team could ask you to provide them with a Configuration Manager table view export, for further investigation of your devices, such as a full overview of the installed cameras or with the cameras with a specific problem. This article will help you to learn how to do this export.