Security: Video

Question Why the Autodome 7000i INTEOX cannot connect to the S&ST Cloud services?   Answer Most likely, when you tried to connect to the S&ST ecosystem, you missed one of the steps explained in this article: How to connect a Bosch INTEOX camera to S&ST using Configuration Manager?   If you are sure that you have followed correctly the steps from the article above, please collect from camera: Diagnostics logs Config file with log in credentials Event logs How to collect logs from your Bosch IP Camera/Encoder? Please check if the the following message is displayed in the logs: ✅ Tip "Not connecting (CC enabled: true; Network connection: true; MQTT client ready: true; NTP enabled: false)" → this indicates that you didn't turn on the NTP which is a prerequisite to connect to the cloud back-end  Please enable the timeserver and make sure the time of the camera is synchronized with a public time-server when connecting to the S&ST cloud.   Note: NTP synchronization is necessary if the camera is going to be claimed in the portal. Please refer also to the Help & Support page:  Claiming cameras

Question   Why the Windows license key and System ID are the same on all my DIVAR IP 6000?   Answer   These units come pre-licensed from the factory and they have an OEM (Original Equipment Manufacturer) license activated. Please see more information about OEM on the Wikipedia link below:  https://en.wikipedia.org/wiki/Original_equipment_manufacturer According to its datasheet, all components relevant to the usage of DIVAR IP 6000 as storage array in a Bosch recording solution are pre-installed and preconfigured. Simply connect to the network and power the unit up — DIVAR IP 6000 is ready to begin recording straight out-of-the-box.

Question   Where can you find the ISO image for recovery of DIVAR IP 7000R2 and DIVAR IP 6000R2?   Answer   Related Products: DIVAR IP 7000R2 and DIVAR IP 6000R2   CTN Description   DIP-6180-00N  DIVAR IP 6000 2U W/O HDD  DIP-6183-4HD  DIVAR IP 6000 2U 4X3TB  DIP-6183-8HD  DIVAR IP 6000 2U 8X3TB  DIP-6184-4HD  DIVAR IP 6000 2U 4X4TB  DIP-6184-8HD  DIVAR IP 6000 2U 8X4TB  DIP-61F0-00N  DIVAR IP 6000 3U W/O HDD  DIP-61F3-16HD  DIVAR IP 6000 3U 16X3TB  DIP-61F4-16HD  DIVAR IP 6000 3U 16X4TB  DIP-7180-00N  DIVAR IP 7000 2U W/O HDD (R2)  DIP-7183-4HD  DIVAR IP 7000 2U 4X3TB (R2)  DIP-7183-8HD  DIVAR IP 7000 2U 8X3TB (R2)  DIP-7184-4HD  DIVAR IP 7000 2U 8X3TB (R2)  DIP-7184-8HD  DIVAR IP 7000 2U 8X4TB (R2)  DIP-71F0-00N  DIVAR IP 7000 3U W/O HDD (R2)  DIP-71F3-16HD  DIVAR IP 7000 3U 16X3TB (R2)  DIP-6704-HD 4000GB HDD DIVAR IP 6000/7000    For recovery of DIVAR IP 6000 R2 or DIVAR IP 7000 R2 one should use only the DVD provided with the particular device. Do not use the DVD for recovery if you are not sure that it is the one delivered with the system. In case the DVD is lost or damaged request the respective ISO image from Bosch Technical Support.  Solution:  Request the ISO image from Bosch Technical Support:   Provide the Serial Number of the device Issue description: What is the reason for the recovery Why it is not possible to use the recovery DVD   Note: This article will guide you through the recovery steps of a DIP:  TSG: Rebuild broken OS RAiD on DIVAR IP 6000, DIVAR IP 6000 R2, DIVAR IP 7000, DIVAR IP 7000 R2

Related Products Workstations, Z4G4, Microsoft License Question Is it possible to Activate Windows 10 by phone for Bosch Workstations? Answer With introduction of Windows 10, Microsoft disable the phone license activation for Bosch Workstations. Please perform online activation over internet.

Question Why I cannot see my camera in the Logical Tree from Operator Client? Answer Please make sure that you have done all the steps below accordingly. Normally, to be able to view a camera in the Operator Client, you need to: Go to the Maps and Structure tab from Configuration Client. Drag and drop the camera in question from the Device Tree to the Logical Tree. Save and Activate the changes. This step is very important because otherwise, you will not be able to see the changes in Operator Client, even though the first 2 steps were carried out in Configuration Client.

This article explains how to find and calculate the specific size of BVMS logs on your server when the log starts to overwrite your own data.

Various overlays in the video image provide important status information. But what does mean the blinking play button near the yellow exclamation icon?

Do you want to configure the 3rd party iSCSI storage with different LUNs for recording more cameras without Bosch VRM? This article explains you if this application is supported.