Security: Video

Refer to this article if you are looking for what  default ports are used with Intelligent Insights

In this article, we will address the difference between Cloud Storage & Event alarm clip and what the customer is entitled to base on the licenses he had purchased.

This article explains what is the difference between operations mode of a DIVAR IP all-in-one 4000 & 6000.

Check the sample script from this article. It is not a working script, that can be used directly. Follow the instructions in comments of the script to tailor it for your use.  

The DIVAR IP units are prepared from production to use at first setup the port 8454.

HD Decoders are not downgrade-able lower than the factory default version. All Video Management Systems should not have issues with newer Firmware. All their implemented functions should work.

Find out from this article what could be the causes of red cross displayed in Configuration Manager for MVS when connecting with iOS device

This article give you hints on what you can do if you are not able to see the expansions of your DSA E2800 in the Hardware tab and you see the controller only.

It is advised to use Bosch tools like the Configuration Manager to configure the camera, that does not allow for issues like XSS

Intelligent Audio Analytics feature is available for FLEXIDOME 5100i panoramic cameras. This feature is available on camera firmware starting with version 8.80.

This article explains what is Intelligent Video Analytics IVA and recommends  when to use it. Bosch Intelligent Video Analytics is a video analytics type delivered as standard with Bosch IP 7000 to 9000 series with CPP7.3 and older. Furthermore, it does include a hardware accelerator to provide some extra power. 

If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.

This article explain what is the meaning of each button on the KBD Universal XF.

If the Host Type was set to other value than “Factory Default” for DSA E2800 and you want to integrate it with BVMS, the targets will most likely not be scannable and there will be no recordings at all.

This FAQ article explains whether it is possible to activate and use Alarm Out 1 or 2 via DIVAR Mobile Viewer App. One of the tests performed by Central Technical Support Team was on a DIVAR Hybrid 5000 with 6 outputs and they have used the latest firmware versions on DIVAR and cameras, so make sure you do the same.

Find out from this article if it is a cause for concern if the temperature of FLEXIDOME IP 5000i IR (NDI-5503-AL) is higher than other cameras.

In this article you will find the ports which are used for Remote System Management

‘Display stamping’ submenu has been moved from the General menu to the Camera menu.

Let's suppose that the "Customer" user should see 3 cameras in the Video Security App. When logging to the App, he can see only 2 of them. Why?

This article explains where you can find the Camera Trainer for FLEXIDOME IP STARLIGHT 8000i camera and what settings are needed for CT to be displayed in Config Manager