Security: Video

Find out from this article what you must verify if multiple VSG instances are installed on the same HW

Subscribe directly to this article (Option 1) or to the firmware_release_notification label (Option 2) and you will receive a notification in your inbox every time when a new Firmware is released and added to the list within this article.

This article will redirect you to the instructions about how to replace HDDs in the NetApp DSA E2800 unit

If you forgot the password of your BVMS — Bosch Video Management System and you want to reset its password, the Central Technical Support Team can help you.

If you forgot the password of your Bosch IP recorder and you want to reset its password, the Central Technical Support Team can help you.

For all ONVIF, RTSP and JPEG cameras we only support one live stream, and for ONVIF you can only select which profile to use for this one live stream. 

This message may occur due to the conflict between the Device access option set for your Videojet and the Security option set in Configuration Manager.

This article shows the blueprints for the three operation modes that the DIVAR IP supports, combined with Remote System Management. They show the capabilities and limitations of Remote System Management in each of the modes.

This is a living document and the list will be constantly updated. Details can also be found in the BOSCH Product catalogue:

This article explains why am I unable to see the Quad view option in the Live web GUI of FLEXIDOME panoramic 5100i IR camera.

Some options have been removed when compared to previous CPPs, as they are only useful for moving cameras. Find here the overview of the web page of ‘Live’ functions section and the options remained available for FLEXIDOME multi 7000i (CPP14) cameras.

Question   Why the Windows license key and System ID are the same on all my DIVAR IP 6000?   Answer   These units come pre-licensed from the factory and they have an OEM (Original Equipment Manufacturer) license activated. Please see more information about OEM on the Wikipedia link below:  https://en.wikipedia.org/wiki/Original_equipment_manufacturer According to its datasheet, all components relevant to the usage of DIVAR IP 6000 as storage array in a Bosch recording solution are pre-installed and preconfigured. Simply connect to the network and power the unit up — DIVAR IP 6000 is ready to begin recording straight out-of-the-box.

This articles explains what  is Essential Video Analytics and also recommends when to use it. Essential Video Analytics allows you to record all of the object information and change the rules even after the fact for fully configurable forensic search.  

After a power outage/ reboot, all PTZ cameras will get back to their zero-point (home) position. If your PTZ camera was installed looking at a wall, in case of a power outage it will return to its home position where its image is pointing at the wall.

This article provides the Firmware  of the VJD-7513 is also suitable for the successor model VJD-7523.

This article shows where  to check how many blocks cameras can be used in VRM.

If the CPP6, 7 and 7.3 cameras no longer have a live image or there is a delay in the image, and the Internet connection has been tested and is within normal parameters, it would be good to check if the cameras have the latest current firmware version 7.86.0020. This firmware version solves a 100% CPU load issue for CPP6, 7, 7.3 from firmware 7.82 to 7.86.19

This article answer to the question: Why am I unable to see the Dewarped view mode menu in Live web GUI of FLEXIDOME panoramic 5100i IR?

This article explains how is the storage capacity calculated for DSA E-Series E2800 12-bay (RAID 6).

When using ANR function in combination with 'alarm only' recording , recording 1 is with only the motion recorded.