Security: Video

This article gives you few tips to find out why the RealShot Manager does not communicate correctly

The maximum resolution of 5.3 MP can only be achieved with H.264 encoding

Find out from this article the compatibility status between Microsoft Windows 10 Enterprise LTC and Bosch Intelligent Insights

This article explains how to avoid black lines appearing in the live view of Bosch cameras.

Using the camera's Dropbox account when doing an export from the VSC app is not possible anymore with the newest version of FW.

ONVIF control of the thermal DZ was never planned for the MIC-9000i in the launch of the product. However, you can get the Pan and Tilt via ONVIF Device Manager to work by enabling the PTZ configuration of the stream. 

This article presents the considerations that should be taken into account when using the conduit adapter NDA-3080-CND for installation: For protection against water ingress we recommend to avoid top entry for the conduit adapter and use the side and bottom entry position Mark the position of the hole of the surface Drill the hole with the appropriate diameter drill Install a plug in the hole Put the cable through the hole of the conduit plate Attach the conduit plate with the conduit plate adapter to the surface Install the conduit cover on the conduit plate. Tighten the two screws with the TR15 Allen key

Find out from this article what should be done when the MIC IP STARLIGHT 7100I cameras pan but do not tilt

This article describes what shoud be done to achieve an Optical Zoom for FLEXIDOME IP 3000i IR camera.

Once installed and licensed, an application can also be uninstalled from the camera. In this case, the license is being returned to the license pool. It can then be installed on another device. Please note: no return option is possible for the *complete offline use case.

This article explains what to do if buttons are not visible in Bosch Intelligent Insights

To get multiple events in one alarm, please enable Event Batching in the related Service.

Log4j 1.2.17 is not actively used or called by the SQL Server or by the BVMS. This means that the vulnerabilities are not exploitable unless you install some additional components that refer to the vulnerable component. Therefore, there is no risk of exploitation within the SQL Server or BVMS environment.

This article outlines the required license for operating a Bosch Forensic Search within the Genetec Security Center.

This article presents which are  the supported Bosch extensions with the Forensic Search.

The MG Camera Name and Number Setting (BVMS Configuration Client, under MG Camera Settings) was not designed for BVMS Operator Client cameo, but in fact for the CPP-Enc type of decoder like VJD-3000.

According to the release note of the Video Security Client (page 3), you will notice that it is specified that the export of the mp4 video using the Video Security App on iOS or Android device is not possible, while for PC should work without issues.

If you want to be able to replay the recording for the complete retention time, you should use VRM replay. VRM should be accessible and added to the VSC

According to the Release Letter for V3.1.1 and V.3.2.0 - "SNMP- No traps are launched for HDD status changes and recording stops"

Find out from this article if is it possible to get a raw video stream from a Bosch camera