Security: Video

The pop-up dialog window message: "Setup has detected a pending restart.  Please reboot the system and rerun the installation"  appears when attempting to run the valid BVMS windows installer package.

The digital monitor wall functionality was removed since BVMS v11.0, and this is also stated in the release notes.

If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.

In order to increase system security in BVMS, it is recommended to set the Global CHAP password. This article contains the configuration steps for an existing fully operational BVMS 11.x system with no CHAP password configured.

This article explains what can you do when ‘Authentication failed’ message occurs when accessing VSG in BVMS v11.0

Follow the steps from this article if you want to configure your camera to detect motion and then send the event to the server, to start recording. This guide helps you set this option only for nights and weekends. It is important that you find the best possible motion detection settings for the camera in order to avoid unnecessary recordings or notifications.

This article explains step by step how to play exported recording files from VRM eXporter Wizard in BVMS Export Player.

This article presents what symptoms appear in BVMS Operator Client if Time synchronization is wrongly set. Also provides some recommendations about what to do to avoid this symptoms. 

This articles explains what does the User Name column indicate in the BVMS Operator Client LogBook.

Find out from this article what you should do to fix green Image panes in BVMS

What should you do if you tried to drag an drop the device to the cameo window from BVMS Operator Client and instead having the video, it displays the logical tree?

The "storage state failure" alarm doesn't always mean a recording error unless there is a gap at the time of the error for that camera that reported it. It is an error of the iSCSI protocol; it means that when the camera releases the connection for a certain block it has not received a response back from the iSCSI target in a certain time.

Can I display more than 1 camera on a single Monitor of Decoder VJD-7513 in BVMS 11.0 when an alarm is triggered?   System Overview: BVMS 11 1 monitor connected to 1 x VJD-7513 that is part of a Monitor Group The monitor has a layout consisting of several image panes Desired status: when an alarm is triggered → pop up the image of the 4 cameras on the same decoder monitor

This article contains a step-by-step guide which explains how you can do the setup for the camera's live view image pane to be displayed in full screen in the Operator Client if a motion alarm is triggered on that camera,

Windows 11 Pro is now officially supported as OS for BVMS 11.1.1 Operator Client

 This article shows the keyboard shortcuts that can be used by operators when operating the BVMS system. 

Starting with BVMS 10.0, ONVIF encoder events can be retrieved from VSG or ONVIF encoder directly. Additionally to ONVIF profile S, BVMS 10.0 supports ONVIF profile T.

This article explains how you can change the relay mode back to automatic via a script executed when the relay open event is triggered.

The calculation of the storage capacity is done in different way in Configuration Client and VRM Monitor. Check this article and find useful details!

The BVMS 11.1.1 Configuration Manual contains the lists for all components of BVMS, the ports that must be open within a LAN. You can find the used ports list starting with page 346 from the BVMS Configuration Manual.