Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 
    Sort by:
    ‎02-16-2024 10:39 AM
    If you have for example a DIVAR 7000 AIO as central BVMS server and also, on the same network, you have a DIVAR Network Video Recorder (NVR) to which cameras are connected to and recording, the recording is typically handled by the NVR itself. Therefore, in this case the cameras added on the NVR will continue recording only there because the NVR manages the recording and storage of video footage from them.
    View full article
    ‎11-29-2022 02:36 PM
    This article explains step by step how to set Bosch Cameras & Divar network 2000 & UML-245-90 monitor to be able to retrieve audio.
    View full article
    ‎05-25-2023 04:55 PM
    This article explains step by step how to remotely connect to DIVAR Network or Hybrid via Divar Mobile Viewer App
    View full article
    ‎10-16-2023 04:26 PM
    If you have a DIVAR network/hybrid 2000/3000/5000 recorder and you want to connect and configure it, you can do it with the internet explorer compatibility mode in Microsoft Edge and you can use the system as before.
    View full article
    ‎03-07-2022 01:10 PM
    According to the Release Letter for V3.1.1 and V.3.2.0 - "SNMP- No traps are launched for HDD status changes and recording stops"
    View full article
    ‎03-07-2022 12:59 PM
    Username Administrator is not available from the drop-down list, and any generated backdoor password will not work & only one user (other than Administrator) is available in the drop-down list
    View full article
    ‎10-28-2022 03:08 PM
    Alarm functions include local inputs and relay outputs, plus motion detection in user-defined areas. If an alarm is detected, the DIVAR can: send an e-mail notification and/or FTP push, sound a buzzer and/or display a warning, activate local alarm output
    View full article
    ‎09-30-2022 04:33 PM
     This article explains how to exchange the battery on the DIVAR Hybrid and Network in a safe way.
    View full article
    0% helpful (0/1)
    ‎11-25-2022 08:21 AM
    Check this article and find out what you can do if you are using one Divar network 2000 and you have a new Flexidome IP 5000i IR camera, but you cannot add it to the Divar because it is not displayed in “Detection” > “Device search” screen.
    View full article
    Top Contributors