Load balancing is provided with respect to the bandwidth and the number of iSCSI connections and is configurable per IP address ( iSCSI target).
Load-balancing parameters are optimized for the DIVAR IP 5000 default configuration (JBOD). When running DIVAR IP 5000 in RAID 1 mode, load-balancing parameters may need adaptation in BVMS.
Navigate in the device tree of BVMS Configuration Client to VRM devices > Local VRM > [Context Menu of the storage expansion] > Load Balancing
***Soft limits is an estimation of 20% base on hard limit value
** Note: Soft Limit not requires since 3.00.x
DIVAR IP all-in one:
5000: The DIVAR IP all-in one 5000 is a RAID 1 and JBOD supported small tower office server for up to 42 channels with 4 internal HDDs and a maximum storage capacity of 48 TB.
7000 2U: The DIVAR IP all-in-one 7000 2U is a RAID 5 and RAID 6 supported 2U rack appliance for up to 256 channels with 8 internal HDDs and a maximum storage capacity of 96 TB.
7000 3U: And the DIVAR IP all-in-one 7000 3U is a RAID 5 and RAID 6 supported 3U rack management appliance for up to 256 channels with 16 internal HDDs and a maximum storage capacity of 192 TB.
Nice to know:
For a better understanding of the use of our Bosch products, we encourage you to join our online Trainings from Bosch Building Technologies Academy
When completing the Training Plan you will be able to register for a Expert Level classroom Training offered in different countries across the globe!
From our online trainings you can find out:
How to license a system that runs in full BVMS mode
How to check the health of the system
✔️ System recovery
✔️ Replace a hard drive
✔️ Setup SNMP traps in BVMS
✔️ VRM monitor
✔️ Upgrade using Software Center
And many other useful information