Security: Video

This article explains how you can use and set-up dewarping on the FLEXIDOME panoramic 5100i and FLEXIDOME panoramic 5100i IR cameras (edge dewarping).

In this article you will see how to import project files into Configuration Manager in both versions: v6.10 & v7.41  

This article shows how you can use the Project Assistant to remotely commission the FLEXIDOME IP starlight 8000i camera, including set up and adjustments of field of view.

The package updates to the latest recovery image (app0), regardless of which app1 or former app0 firmware is running on any CPP4, 6, 7 or 7.3 platform.

This account has been locked because of too many failed login attempts. Try again in 39 seconds.

This article explains how to configure a single camera that already has a fixed IP address assigned, using Project Assistant App.

When using ANR function in combination with 'alarm only' recording , recording 1 is with only the motion recorded.

This article explains how to playback the SD card recordings in Operator Client from a camera added as Local Storage in BVMS Lite 10.1

This article explains how to configure Monitor B output for Divar AN 3000-5000.

The Divar AN 3000/5000 features the ability to ping an IP address, thus allowing the technician to verify that the workstation that is to connect to the Divar can be seen on the network. Please note that this only checks the connection from the DIVAR to the Workstation. Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target host and waiting for an ICMP echo reply. The program reports errors, packet loss, and a statistical summary of the results.

To get multiple events in one alarm, please enable Event Batching in the related Service.

This article explains what to do when a device scan from within Milestone XProtect is not exposing all Bosch cameras in the network.

XProtect offers 3 different modes of metadata streaming. What are the differences there?

Check this article and find the compatibility matrix between Bosch cameras and Milestone

The article describes how to receive analytic events from Bosch cameras in Milestone XProtect.

This article describes how to secure the data connection between Bosch cameras and Milestone's XProtect by the use of 'Authority-signed Certificates' 

This article describes how to use Milestone's PTZ  "Home" position with Bosch PTZ cameras.

Flexidome 8000i or other future cameras with WLAN option enabled (default ON) in an IPv6 network environment: no IPv4 possible. What to do?

Follow the steps from this article and find out how you can license BVMS Viewer v.11.0  or above for free.

If you are still using BVMS version <9.0 and you want to replace a faulty device without loosing recording, please follow the steps below.