Bosch Building Technologies

    Showing results for 
    Search instead for 
    Did you mean: 
    Sort by:
    ‎04-27-2023 12:45 PM
    For all ONVIF, RTSP and JPEG cameras we only support one live stream, and for ONVIF you can only select which profile to use for this one live stream. 
    View full article
    ‎12-21-2022 11:22 AM
    Camera integrated as NTCIP with SUNGUIDE software works great, but as ONVIF there are issues with the focus. When trying to adjust the focus from the SunGuide software, there are no changes with the camera image.
    View full article
    ‎11-17-2022 10:20 AM
    Have a look in this article to learn how you can add ONVIF cameras to Configuration Manager through VSG managed by VRM.
    View full article
    ‎08-04-2022 05:04 PM
    ONVIF control of the thermal DZ was never planned for the MIC-9000i in the launch of the product. However, you can get the Pan and Tilt via ONVIF Device Manager to work by enabling the PTZ configuration of the stream. 
    View full article
    ‎05-03-2022 11:48 AM
    This article is applicable for all the requests related to third party products integrated in Bosch Video Management System Software over ONVIF.
    View full article
    ‎05-03-2022 11:41 AM
    This article lists the initial troubleshooting steps for issues with ONVIF cameras, added to BVMS system as Live Only ONVIF cameras. The specific point in this scenario is VSG is not used.  
    View full article
    ‎05-03-2022 11:35 AM
    This article shows how to check if particular non Bosch camera is supported in BVMS.
    View full article
    ‎03-18-2022 03:49 PM
    XProtect offers 3 different modes of metadata streaming. What are the differences there?
    View full article
    100% helpful (1/1)
    ‎03-03-2023 10:42 AM
    MQTT is a Client Server publish/subscribe messaging transport protocol.
    View full article
    ‎02-21-2023 10:53 AM
    It is possible to add ONVIF compliant cameras to Bosch Video Management System as live only devices or as VSG devices (then the cameras will also record). This article explains how to add an ONVIF camera as VSG device in full Bosch Video Management System (BVMS 10.1). We recommend using Bosch Workstations and Servers. They are fully tested and optimized for Bosch Video Management System.   Article requirements: BVMS installed ONVIF camera. Please refer to BVMS - ONVIF Device compatibility for additional information. PC/ Server/ Workstation
    View full article
    ‎07-14-2023 10:43 AM
    This article lists the initial troubleshooting steps and concrete instructions for collecting logging for issues with ONVIF cameras, added to BVMS system. We will classify the different issue scenarios one can have using ONVIF cameras in BVMS system. Depending on the issue the article lists the required logging to start initial troubleshooting.
    View full article
    ‎03-05-2024 08:37 AM
    This article explains how to add new ONVIF cameras to a system that runs in full Bosch Video Management System (BVMS) via the Configuration Client. Depending on the license type you have installed in the Bosch Video Management System (BVMS), you can add a certain number and different types of cameras/ encoders.  BVMS supports 3rd party cameras as well, but they need to be compliant to ONVIF Profile S.
    View full article
    Top Contributors