If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.
In order to increase system security in BVMS, it is recommended to set the Global CHAP password.
This article contains the configuration steps for an existing fully operational BVMS 11.x system with no CHAP password configured.
There is an issue with VRM versions lower than 4.0 where the retention time for recordings from VSG instances is set incorrectly. There are a few things that usually cause the recording mode to be set incorrectly. Find out more details from this article!
This article presents what symptoms appear in BVMS Operator Client if Time synchronization is wrongly set. Also provides some recommendations about what to do to avoid this symptoms.
Can I display more than 1 camera on a single Monitor of Decoder VJD-7513 in BVMS 11.0 when an alarm is triggered?
System Overview:
BVMS 11
1 monitor connected to 1 x VJD-7513 that is part of a Monitor Group
The monitor has a layout consisting of several image panes
Desired status: when an alarm is triggered → pop up the image of the 4 cameras on the same decoder monitor
This article contains a step-by-step guide which explains how you can do the setup for the camera's live view image pane to be displayed in full screen in the Operator Client if a motion alarm is triggered on that camera,
Starting with BVMS 10.0, ONVIF encoder events can be retrieved from VSG or ONVIF encoder directly. Additionally to ONVIF profile S, BVMS 10.0 supports ONVIF profile T.
The BVMS 11.1.1 Configuration Manual contains the lists for all components of BVMS, the ports that must be open within a LAN. You can find the used ports list starting with page 346 from the BVMS Configuration Manual.