Security: Video

In this solution article a questionnaire for a first basic analysis of a reported issue is described. This checklist is intended to help to identify and resolve known issues immediately and to collect relevant data in case of an unknown issue. 

You can call desired pre-positions (PTZ) of Bosch IP cameras by using OSRD protocol or BiCom protocol. Please check this aticle to find some examples and detailed explanation.

This article describes how can you disable password Policy for Cameras/ Encoders and provide compatibility with older/ 3rd party systems.

In terms of license activation process and compared to other versions of BVMS (<v11.0), the Bosch Remote Portal replaces the Bosch Software License Manager System (SLMS), starting with BVMS v11.0.

The red x  indicates that the password of the camera is not set in your DIVAR and you will be not able to see the camera’s image.

In Bosch VMS it is possible to assign an LDAP user group to a Bosch VMS user group. This article describes why it is important to not assign the same LDAP user group to multiple Bosch VMS user groups.

It is possible to add ONVIF compliant cameras to Bosch Video Management System as live only devices or as VSG devices (then the cameras will also record). This article explains how to add an ONVIF camera as VSG device in full Bosch Video Management System (BVMS 10.1). We recommend using Bosch Workstations and Servers. They are fully tested and optimized for Bosch Video Management System.   Article requirements: BVMS installed ONVIF camera. Please refer to BVMS - ONVIF Device compatibility for additional information. PC/ Server/ Workstation

Let’s suppose that you have one setup which consists in an Adam 6060 I/O module, BVMS and a DINION IP thermal 8000 camera. Can the state of an ADAM relay module be changed when the IVA from the camera generates an alarm?

By checking the Zoom threshold box you will select the current zoom position at which the mask will appear as the camera zooms in or be hidden as the camera zooms out.

This article contains videos which explain the usage of Bosch cameras integrated in Genetec Security Center.

This article explains how to proceed when you want to register a camera to Bosch Remote Portal and the client’s network is restricted.

This article explains how to configure an alarm communication between BVMS and Gmail e-mail address.

This guide is meant to help you adding new cameras in VRM in Configuration Client and display their images in Operator Client.

Applicable when using the following software application. Bosch Video Management System (BVMS) version 10.0.1 and above. Bosch Configuration Manager version 7.0 and above. Live page on the web browser for IP camera operating on firmware version 7.70.0126 and above.

This article describes how to factory default a DIVAR IP 5000 Unit.

In this article we cover the following basic questions: How to Factory Default a NetApp E-Series unit by using BOSCH tools and NetApp WEB GUI? How to download the NetApp Support Bundle of a reachable online NetApp Storage Array

Check this article and see what's new in Project Assistant version 1.2.2

After clicking the Forensic Search button in Bosch Video Management System (BVMS) - Operator Client, "Video image is not available" message is displayed. What could be the reason?

This article explains how to license a system that runs in full Bosch Video Management System (BVMS) mode with help of Security Systems Software License Manager tool (SLMS).

This article contains a simplified and generalized example, that could be helpful in building a particular tailored script related to implementation of event receiver in BVMS SDK scriplet.