Security: Video

In this article it is explained in a step-by-step guide how to activate the needed services in Remote Portal to be able to connect the cameras to Bosch Alarm Management.

Depending on the 3rd party cameras’ capabilities, there are different ways of adding cameras to Bosch Alarm Management.

The Smart Notification service lets your end-customer easily keep track of business operations. Detection, notification and storage of events like warehouse access, POS transactions or goods delivery enable efficient monitoring and resolution of critical events for the business owner. Please follow below steps to set up a Smart Notification service.

Bosch Alarm Management allows event-based and continuous cloud recording of connected cameras.

This list contains information on what situations might happen if no Smart Notification reaches the mobile device and no event appears in the Site Monitor App's event list:

AI Alarm Verification is applicable to Bosch Remote Portal cameras and 3rd party cameras**, for sites in Alarm Management which support alarm clip upload. 

Keep an eye on your customers’ sites, and verify on-demand if the site is clear before the personnel enters.

For years, we’ve provided a convenient way to view live videos from the Bosch Video Security Client via Remote Portal to complement our products. We’re delighted to share an enhanced service coming in April 2024. VideoView+ is a purchasable license that is simple and user-friendly to access your videos from anywhere.

This article contains all the steps to set up a Video Verification service (triggered by intrusion panel) in Bosch Alarm Management.

Follow the steps from this article to set up a Live Intervention service in Bosch Alarm Management.

When smoke or fire is been detected, AVIOTEC will sent a Smoke/Fire event to the Alarm Management and at the same time trigger it’s output.  Using this output status, we are able to trigger the Alarm Management.

Remote VCA configuration through the camera's device page (website) now can be performed with Bosch Configuration Manager version 7.60 and later.

In this article, we will address the difference between Cloud Storage & Event alarm clip and what the customer is entitled to base on the licenses he had purchased.

This article explains how you can set up a Virtual Assistant service in Bosch Alarm Management

To be able to configure Customer Traffic Report service the Bosch IP camera needs to support Intelligent Video Analytics or Essential Video Analytics.

This article shows available actions in Bosch Alarm Management and provides a step by step instruction to configure these actions.

If the CPP6, 7 and 7.3 cameras no longer have a live image or there is a delay in the image, and the Internet connection has been tested and is within normal parameters, it would be good to check if the cameras have the latest current firmware version 7.86.0020. This firmware version solves a 100% CPU load issue for CPP6, 7, 7.3 from firmware 7.82 to 7.86.19

This document contains information on what situations might happen if no alarm events from a Live Intervention, Video Verification or Virtual Assistant services appear in the Alarm Management Operator Interface and how to advise.

The Virtual Guard service allows your operators to perform scheduled video checks of all key areas at the customer site.

The live view of the camera is loading indefinitely in Alarm Management Operator Interface > Live View and Investigation Mode and has no streaming video at all.