Security: Video

This article provides solution regarding 3rd party camera which is  added in VSG and is not displayed in the Device Tree from BVMS Configuration Client.

Follow this article to find out what you should check and do if your 3rd party camera is flashing between image and Bosch logo in Operator Client

It is only possible to configure a single time server per BVMS system to be used as time source for the VRM encoders.

This article describes how Streamlining works and how it can be finetuned.

BVMS v10.1 and  BVMS v11.0 come with a checkbox where you can logon to the Operator Client with Windows Credentials. If you want to use this function, you need to set up the BVMS Configuration Client and browse the AD users-groups. Then, the users can sign in to Operator Client with their Windows-Credentials. 

Have a look at this article and learn how to fix the Add Scriptlet button which does not become active. It stays grayed out. Same happens with ClientScript and ServerScript.

Monitor Group gives operators flexible control over the content of a video wall or allows them to let the system take over this control automatically based on pre-defined scenarios. This article describes how to create a Monitor Group on a decoder VJD 7xxx/ 8xxx in BVMS Configuration Client

This article provides the step-by-step procedure on how to configure “BVMS” presets and save views.

Starting with BVMS 11.0, the license activation is done via Bosch Remote Portal. A transfer of the license from the Bosch Software License Manager System (SLMS) to the Bosch Remote Portal is required for every BVMS system to be upgraded from 10.1 to 11.0

In terms of license activation process and compared to other versions of BVMS (<v11.0), the Bosch Remote Portal replaces the Bosch Software License Manager System (SLMS), starting with BVMS v11.0.

This article explains step by step how to add a DIVAR Hybrid 5000 in BVMS Viewer and see Live image of cameras connected to the DIVAR.

In Bosch VMS it is possible to assign an LDAP user group to a Bosch VMS user group. This article describes why it is important to not assign the same LDAP user group to multiple Bosch VMS user groups.

It is possible to add ONVIF compliant cameras to Bosch Video Management System as live only devices or as VSG devices (then the cameras will also record). This article explains how to add an ONVIF camera as VSG device in full Bosch Video Management System (BVMS 10.1). We recommend using Bosch Workstations and Servers. They are fully tested and optimized for Bosch Video Management System.   Article requirements: BVMS installed ONVIF camera. Please refer to BVMS - ONVIF Device compatibility for additional information. PC/ Server/ Workstation

This article explains how to configure an alarm communication between BVMS and Gmail e-mail address.

This guide is meant to help you adding new cameras in VRM in Configuration Client and display their images in Operator Client.

Applicable when using the following software application. Bosch Video Management System (BVMS) version 10.0.1 and above. Bosch Configuration Manager version 7.0 and above. Live page on the web browser for IP camera operating on firmware version 7.70.0126 and above.

After clicking the Forensic Search button in Bosch Video Management System (BVMS) - Operator Client, "Video image is not available" message is displayed. What could be the reason?

This article explains how to license a system that runs in full Bosch Video Management System (BVMS) mode with help of Security Systems Software License Manager tool (SLMS).

This article contains a simplified and generalized example, that could be helpful in building a particular tailored script related to implementation of event receiver in BVMS SDK scriplet.

BVMS - Automatic login of Operator Client: The BVMS Operator Client can be automatically logged in by using parameterized startup.