Starting with BVMS 12.2, new OpenID Connect (OIDC) login options have been introduced. When closing the Operator Client, the user can decide to completely log off or stay logged-in.
This document is specifically for DIP-73xx as it's the only DIP with Software Center.
The document details how to upgrade all the way from BVMS 10.1 with Software Center and to BVMS 12.1 with System Manager 2.3
Regular BVMS 12.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application. Usually, we recommend to upgrade BVMS in steps. Each version should not be more than ~two years apart. This prevents potential issues in the upgrade process.
OPC server is installed on the BVMS server
OPC client software is installed (the client used in this article is Softing OPC Toolbox Demo Client), and the user can connect to OPC server that is running on BVMS server, but the user cannot send any command from 3rd party OPC client to BVMS system, for example changing the status of virtual inputs.
There are no events coming from OPC to BVMS and the OPC client is not present in the list for third party integrations with BVMS
This article describes the different components that Bosch Video Management System offers to to establish a connection between Bosch Video Management System and a 3rd party management system.
This description helps you in writing your own commands for controlling Bosch VMS from inside your management system.
In this scenario, an alarm button is connected to the Adam unit and when this input is activated (close or open), a full screen camera image shows on the display. The display is always logged in the Operator Client for live camera view on the DIVAR IP 7000 AIO.
Log4j 1.2.17 is not actively used or called by the SQL Server or by the BVMS. This means that the vulnerabilities are not exploitable unless you install some additional components that refer to the vulnerable component. Therefore, there is no risk of exploitation within the SQL Server or BVMS environment.
This article explains how to use the settings as per the devices current configured capabilities if you just added a device to BVMS, you get the possible stream options as per a “Config table” known to BVMS.
The connection of 2N® Helios IP intercom to BVMS and Bosch Access Control System is possible thanks to the implementation of ONVIF and Wiegand protocols, which ensure mutual compatibility.
In the Logbook, you can search for particular events, alarms, devices, and strings of events. You have the possibility to save the BVMS Operator Client alarm logbook, before accepting and clearing it.
Starting with BVMS version 12.0, the Privacy overlay feature was introduced. This feature can be configured to blur objects of type Person, based on a powerful Bosch Artificial Intelligence (AI) function
When trying to get the Software Assurance Report from Remote Portal, it cannot be generated, and the red message below occurs: “Upload a valid system info file or Enter a valid System fingerprint”. Why?
BVMS v11.0 offers a map-based tracking assistant and improved geographical awareness with online maps. Read on to learn how to configure the map-based tracking assistant.
This article explains how to add new ONVIF cameras to a system that runs in full Bosch Video Management System (BVMS) via the Configuration Client. Depending on the license type you have installed in the Bosch Video Management System (BVMS), you can add a certain number and different types of cameras/ encoders. BVMS supports 3rd party cameras as well, but they need to be compliant to ONVIF Profile S.
This article describes how a Tattile camera can be connected to BVMS. We recommend keeping the Tattile camera documentation and BVMS configuration manual at hand to fine tune the system configuration to the specific needs of your project
