If you have a DIVAR network/hybrid 2000/3000/5000 recorder and you want to connect and configure it, you can do it with the internet explorer compatibility mode in Microsoft Edge and you can use the system as before.
If the administrator account (which was originally created when initial setup wizard was run) has been deleted locally and another new administrator account was created, then it is not possible to create user via web. Only locally is possible, as the application is still looking for the original admin account.
A workaround here would be to default your Divar Network and follow the setup wizard > this will create the administrator user again and will let you create new users again.
Or create the new users locally on your Divar.
Bosch strongly recommends upgrading to the latest firmware for the best possible functionality, compatibility, performance and security.
Check http://downloadstore.boschsecurity.com/ regularly to see if there is a new firmware version available.
DIVAR network 5000 / DIVAR hybrid 5000 support configuration of 3rd party cameras through the ONVIF Profile S protocol.
Let's suppose that y ou have ONVIF cameras connected to a DIVAR network 5000 / DIVAR hybrid 5000 on your site and you are using Bosch Video Management System (BVMS) Viewer.
Can BVMS Viewer monitor those cameras at the same time?