Security: Video

This article explains the meaning of each color on the Playback timeline in BVMS Operator Client.

This article explains that by pressing ALT+TAB  it is possible to return on the kiosk mode from DIVAR IP System Manager without the need of restarting the unit.  

In this article you will learn how to install the keyboard drivers and hot to configure a BVMS workstation for Keyboard integration

This article responds to the following questions: At what temperatures does the factory installed heater turn on and off?  Does the blower turn on and off with the heater or does it run continuously?  What is the power consumption of the heater? What is the power consumption of the blower?

This article mentions that the material from which the Surface Mount Box of the NBE-5503-AL is made of is Aluminum.

This article provides the Firmware  of the VJD-7513 is also suitable for the successor model VJD-7523.

This article shows where  to check how many blocks cameras can be used in VRM.

Follow this article if you would like to optimize the image quality of your AUTODOME IP 5100i camera

Due to an error in the software interface to the secure element chip on the cameras, the chip can be permanently damaged. Follow this article and find out the mitigation of this behavior

The DIVAR Mobile Viewer App allows you to receive real-time notifications for various alarm events from your DIVAR IP system. This article is a step-by-step guide meant to show you how to activate alarm push notification in DIVAR Mobile Viewer App (Android).

This article describes what shoud be done to achieve an Optical Zoom for FLEXIDOME IP 3000i IR camera.

This article provides steps regarding how to create an user and connect the Bosch Site Monitor App to Alarm Management.

This article presents what are the limitations of Privacy overlay in BVMS 12 (Pano cameras, h.263 & MPEG, decoder, VSC).

This article mentioned which ports does Configuration Manager use for devices searching. The RCP+ discovery port for Bosch cameras, encoder and decoders is port 1800.

This article explains what is the difference between operations mode of a DIVAR IP all-in-one 4000 & 6000.

This article presents what should be checked when the Sever State is Disconnected in Logical Tree from BVMS Operator Client.

This article shows what shoud be checked if the KBD-Digital cannot be connected to the BVMS workstation.

DIP serial number can be found in 2 ways. IPMI information cannot be found within the software and is provided on the device itself. It can be found next to the BMC/IPMI port on the back of the device.

If the IPMI default password is lost, a tool called IPMICFG-Win, available from the SuperMicro website, can be used to recover it.

IVA pro Buildings pack and Traffic pack on CPP14 use the following resolutions: 1280x720 resolution for 25/30 fps base rate,  1024x576 resolution for 50/60 fps base rate.