Security: Video

If the administrator account (which was originally created when initial setup wizard was run) has been deleted locally and another new administrator account was created, then it is not possible to create user via web. Only locally is possible, as the application is still looking for the original admin account.

Alarm functions include local inputs and relay outputs, plus motion detection in user-defined areas. If an alarm is detected, the DIVAR can: send an e-mail notification and/or FTP push, sound a buzzer and/or display a warning, activate local alarm output

It is only possible to configure a single time server per BVMS system to be used as time source for the VRM encoders.

If you have for e.g. a SNC-EM642R camera and you want to find out which device packs you need for your entire solution, follow the steps from this article.

The unit can receive the time signal from a time server using various time server protocols and then use it to set the internal clock. The device polls the time signal automatically once every minute. To check the NTP connection from the camera please follow this article.

This article contains all the steps to restore DIVAR IP 7000 R2 to factory default. Note: By performing the Initial Factory Setup on the system, ALL DATA from the ENTIRE system will be erased.

If you have configured an out of the box system and once the configuration was done you wasn’t able to access the BVRAdmin account, this article will help you to find a solution. Access to BVRAdmin account is required to perform administrative tasks on the operating system. This requires the following steps:

 This article explains how to exchange the battery on the DIVAR Hybrid and Network in a safe way.

This article explains if you can receive / retrieve more than 4 live video streams with BOSCH Video Security Client on Windows PC

This article explains how BVMS can be configured to connect to an LDAP (or Microsoft Active Directory) and use it as a base for user authentication.   BVMS is able to function in a (Windows) domain-controlled environment. The BVMS (and related) services run under the local system account. If another (domain-controlled) account is used to run these services, their permissions level should be the same as the local system account. It is recommended to add the Windows server to the domain first (as a domain member), before installing the BVMS software. The BVMS configuration is independent from the domain configuration, however, crucial changes in the domain could break the connection between the BVMS system and the LDAP authentication mechanism.

This technical note summarized the different integration possibilities available today and the clients supplied by Bosch.

This article describes how to benchmark Video Analytics and differentiate video analytics solutions.

This article describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.

The article describes how to track ships using Intelligent Video Analytics with FW 6.30, how to configure this and what the limitations are.

The museum mode of Intelligent and Essential Video Analytics is an optimized tracking mode to detect whenever someone tries to reach towards and touch a valuable asset like a museum exhibit. It can also be used in any other application where approaching a sterile zone from a more crowded environment shall be detected.

This article describes how to configure the Map-based calibration and Geolocation in different calibration methods

Never lose track of an object of interest! Intelligent Tracking automatically zooms in to and follows a selected Intelligent Video Analytics object as far as possible with the camera.

This article describes how to factory default a DIVAR IP 5000 Unit.

The Project Assistant offers two ways of importing existing project data Importing a .bpassist file or importing from a tab-separated text file

In this article you can find an overview of the tested and supported ONVIF cameras for BVMS.