Security: Video

The alarms appear, the forensic search is working fine, but the yellow lines don’t appear on the recording line/ timeline. What to do to display the yellow lines in timeline?

When entering in BVMS Operator Client, the camera's image is black and only Transcoding option is available for streams (no stream 1 or 2 , or image pane optimized) Desired result: See the camera's live image

Find out from this article what does mean the sand clock (hourglass) symbol showed in the Operator Client Logical tree

According to the Release Letter for V3.1.1 and V.3.2.0 - "SNMP- No traps are launched for HDD status changes and recording stops"

In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket. Related Products: BVMS Operator Client Overview: This article describes the initial steps one can take for troubleshooting BVMS display issues (during live view or playback). It also summarizes what initial information and logs are needed for support in order to start the issue investigation.   General Information   SMA validity How to retrieve the Hardware ID for BVMS and check the Software Maintenance Agreement (SMA) status? BVMS stand alone or appliance Detailed problem description Check and eventually update the version of your Graphic Card driver. During BVMS system tests there were documented cases of display issues related with out of date Graphic card divers. ❗ It is important that the Graphic Card driver of the client is up to date. Find the supported version of the Graphic Card driver in the corresponding to your BVMS version Release Notes (https://downloadstore.boschsecurity.com), in the section Hardware drivers.   Symptom specific Information   Problem Description   Is the issue dependent on camera type/ FW? Are all the devices in the system affected? Is the issue existent for all BVMS Operator Clients in the system? Is the issue existent for hardware decoders, for camera Web Interface or other display Clients? Is the recording, the playback or are both affected?   Logging Information   BVMS ConfigCollector logs keeping the following conditions: From the machine that shows the issue VSDK logging – please follow the steps from the article: How to collect Video SDK log files  VRM logs (in case VRM runs on the same machine like the BVMS MS, then BVMS ConfigCollector logs from the server) for VRM version 3.82 and onwards use VRM Monitor. The following articles will help you out:   How to access VRM monitor from BVMS Configuration Client? How to collect VRM logs with VRM Monitor (v3.82/ v3.83)? Screenshot of the Dashboard of the VRM for VRM version till 3.81 - contact support to receive BVIP Log collector tool and use it to collect VRM logs Movie showing the display artefacts can be helpful

In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket.   Related Products: BVMS, Operator Client This article describes the initial information needed to start troubleshooting Operator Client Crash.   General Information   SMA validity How to retrieve the Hardware ID for BVMS and check the Software Maintenance Agreement (SMA) status? BVMS stand alone or appliance Detailed problem description   Symptom specific Information Problem Description   Note down the events that lead to crash Classify the crash reproducible crashes that trigger Windows Error Reporting crashes/ hangs/ freezes that are hard to reproduce, or take long before repeating   Logging Information   Dump file from the crash – refer to the following article How To create BVMS memory dump?  ConfigCollection from the machine where the crashing Operator Client is running.