Security: Video

Find out from this article the cause and possible solutions for status 4 and status 6 messages occurred on MIC IP FUSION 9000i camera.

This article explains how enabling electronic image stabilization (EIS) on CPP14 cameras affect privacy masks. As soon as the "electronic image stabilization" (EIS) is set to on, the image section changes slightly, which changes the placement of the privacy mask.

This article explains how to set up a custom tour for Bosch cameras and finally making the custom tour accessible in the BVMS Operator Client.

This article answer the question if DINION 5100i IR (NBE-5702) is supported by Milestone XProtect VMS. The Milestone Supported Device List shows the DINION 5100i IR (NBE-5702) camera as being supported with tested Firmware version 9.10.0192*.

This issue typically arises when you have installed an incorrect version of BVMS.

This article provides a step-by-step guide on how to onboard a Bosch camera to Genetec Security Center SaaS using Direct-to-Cloud (D2C) connectivity.

Bosch Security Systems is a leader in advanced camera-based video analytics, offering unparalleled detection accuracy and speed through on-camera processing. This approach not only accelerates analytics performance but also eliminates the need for additional on-site server hardware, providing significant cost and operational efficiencies.

You can export any single favorites item, folder or the complete favorites tree. You can then share the exported file or files with other users or upload it on your workstations.

It is not recommended to use a bridged NIC configuration for ONVIF cameras integrated in the VSG Server with BVMS.

Please note that this is not a bug, this behavior is as designed. Passwords are no longer stored in the config file. Therefore, a new password must be entered.

This article describes the best practices for and answers common questions regarding intrusion detection using IVA Pro Perimeter with FW 8.90 (CPP13) / 9.40 (CPP14).

This is a step-by-step guide about how to configure the IVA Pro Appearance.

This article is a step-by-step huide about how to configure the IVA Pro PPE (Personal Protective Equipment)?

This article is a step-by-step guide  about howto configure IVA Pro Privacy for face detection, blur, and anonymize moving/stationary objects.

This article explains which plug-ins to use for Bosch cameras integrated with Milestone.

This article present causes and solutions for device configuration not supported error and the site can’t be reached error after the camera’s IP address change.

If the image quality of AUTODOME 7100i camera is opaque and dark, especially during winter conditions when the majority of the viewing area is covered with white snow and there is cloudy day weather with no direct sunlight, you can improve the image quality by following this article.

This article is a step-by-step guide about how to downgrade the firmware of DINION inteox 7100i IR (CPP13) from v8.91 to v8.45 (Error 111)?

When an operator client is connected to an older version (than itself) of the (Enterprise) Management Server, it will run in compatibility mode. 1. An operator client cannot connect to a newer (Enterprise) Management Server: the Operator Client needs be of a higher version than the (Enterprise) Management Server. 2. The compatibility in an Enterprise system is determined by the version of the Management Server of the Subsystem and the Operator Client. In production systems it is not recommended to use versions which are released more than two years apart.

For fast incident retrieval, the free Forensic Search Plug-in seamlessly integrates with Genetec Security Center and is fully compatible with all Bosch cameras. When the Bosch Forensic Search Plug-in is installed and configured, it can be used from Genetec Security Desk.