Security: Video

This article describes the best practices for and answers common questions regarding intrusion detection using IVA Pro Perimeter with FW 8.90 (CPP13) / 9.40 (CPP14).

This article is a step-by-step guide  about howto configure IVA Pro Privacy for face detection, blur, and anonymize moving/stationary objects.

This is a step-by-step guide about how to configure the IVA Pro Appearance.

This article is a step-by-step huide about how to configure the IVA Pro PPE (Personal Protective Equipment)?

This article explains what is IVA Pro Perimeter and what does 2D & 3D Tracking Parameters mean.

Intelligent Video Analytics (IVA) Pro provides application-specific packages for building security and operations (IVA Pro Buildings), perimeter security (IVA Pro Perimeter), and traffic monitoring (IVA Pro Traffic). While some of the IVA Pro variants are included by default on supported cameras, others can be added via licenses. This article is dedicated to describing the license process in full.

This article describes how to configure the Map-based calibration and Geolocation in different calibration methods

Different devices, whether cameras or encoders, offer a different amount of processing power for video content analysis (VCA).

In this article, you will find such an automation process between Bosch Cameras and Advantech Adam I/O devices.

Find out from here what is VCA (Video content analysis) and how you can stop this setting.

We found that there was a change in the way intelligent tracking worked after CPP 7.3 firmware v7.62.0005. With these changes if an object triggered an alarm that turned on intelligent tracking, the camera would not track the object. It would wait for another object to trigger an alarm to track it.

Unsupported camera model: Auto-calibration is currently not supported for this camera model. Calibration could produce wrong results or might not work. Why is this message displayed in Configuration Manager?

The field intersection trigger “edge of box” means the field alarms whenever any part of the object’s bounding box overlaps with the alarm field

The calibration can be done by using already recorded videos, as is demonstrated in the video below. Either video recorded on the camera's SD card or on a recorder can be used. This can save calibration time and can be done by a single person.

This article presents what does each Task of Video Analytics (Bosch Security and Safety Systems).

This article describes how to count with Bosch Video Analytics with How to Video and a Technical Note on the topic.

Global VCA under the VCA task in Configuration Manager is used from default on the camera (with no specific configured VCA Rules). VCA Profile: Global (from Positioning) is used to set the same height of the camera for all VCA profiles.

This article explains steb by step how to create the VCA fields for multiple presets in Configuration Manager.

One of the reason for this error when trying to access the VCA Tasks/ Metadata Generation could be generated because of the configured tasks which exceeded the Script Size limit (limit=2000 bytes) and metadata cannot be read.