Security: Video

In this article it is explained in a step-by-step guide how to activate the needed services in Remote Portal to be able to connect the cameras to Bosch Cloud VMS.

Follow the steps from this article to add a Bosch IP camera to the Cloud VMS.

Bosch Cloud VMS allows event-based and continuous cloud recording of connected cameras.

Offer your customers remote access to live video streams from all their video surveillance-secured sites from any smart phone or tablet, so they can check in any time, from anywhere.

The Smart Notification service lets your end-customer easily keep track of business operations. Detection, notification and storage of events like warehouse access, POS transactions or goods delivery enable efficient monitoring and resolution of critical events for the business owner. Please follow below steps to set up a Smart Notification service.

AI Alarm Verification is applicable to Bosch Remote Portal cameras and 3rd party cameras**, for sites in VSaaS which support alarm clip upload. 

Keep an eye on your customers’ sites, and verify on-demand if the site is clear before the personnel enters.

In this article, we will address the difference between Cloud Storage & Event alarm clip and what the customer is entitled to base on the licenses he had purchased.

Follow the steps from this article to set up a Live Intervention service in Bosch Cloud VMS

This article contains all the steps to set up a Video Verification service (triggered by intrusion panel) in Bosch Cloud VMS

This list contains information on what situations might happen if no Smart Notification reaches the mobile device and no event appears in the Site Monitor App's event list:

To be able to configure Customer Traffic Report service the Bosch IP camera needs to support Intelligent Video Analytics or Essential Video Analytics.

This article shows available actions in Bosch Cloud VMS and provides a step by step instruction to configure these actions.

This article explains how you can set up a Virtual Assistant service in Bosch Cloud VMS

The Virtual Guard service allows your operators to perform scheduled video checks of all key areas at the customer site.

Remote VCA configuration through the camera's device page (website) now can be performed with Bosch Configuration Manager version 7.60 and later.

This document contains information on what situations might happen if no alarm events from a Live Intervention, Video Verification or Virtual Assistant services appear in the Cloud VMS Operator Interface and how to advise.

Do you want to know what was changed in the new Cloud VMS version? Check this article and find out how and where you can see the new features

Check this article and see how to solve if the cameras in Cloud VMS cannot use services activated in Remote Portal. 

When smoke or fire is been detected, AVIOTEC will sent a Smoke/Fire event to the Cloud VMS and at the same time trigger it’s output.  Using this output status, we are able to trigger the Cloud VMS/VSaaS .