Security: Video

This article contains the scriplet that on Input sends a RCPP command on Input to another camera to close its Relay 1.

This article explains what is the Intelligent Dynamic Noise Reduction (iDNR) in Bosch cameras.

This article explains what is the difference between video coding H264 and H265 (Bosch cameras).

This article explains if is it possible to enable Remote Desktop on DIVAR IP all-in-one 6000 and connect on it remotely.

Aside from configuring the camera using its own browser, there are other tools you can use to setup the camera. The choice when using which tool will come down to the individual installer. Their experience and know-how of the tool will dictate which one they will use. 

What FW versions did Crowd Density Estimation get removed from IVA Pro? What to use in replacement for Crowd Density Estimation? How to remove the unrecognized task?

By default, the DIVAR IP all-in-one 7000 devices are intended to operate with one or two local monitors, connected to HDMI interfaces on the rear of the unit. If NO HDMI is connected, then iKVM over BMC port is active and available. In this case, it is supported to remove VGA cover and use it as local admin monitor, not to run the Operator Client.

Bosch recommends that the operating systems used by the video surveillance system are constantly updated, with a maximum update cycle of 6 months. Windows updates often include fixes for recently discovered security vulnerabilities, such as the Heartbleed SSL vulnerability, which affected millions of computers worldwide.

The Cameo SDK is only backwards compatible, same as the Operator Client. According to the BVMS - Upgrade and Migration guides (boschsecurity.com)

This article answers whether there is a character limit for the MQTT broker username on Bosch cameras.

This article explains if is it possible for DINION IP Thermal 8000 camera to measure the exact temperatures or not.

This article explains if is it possible to change the default port to which Bosch camera can send JPG towards an FTP server.

This article recommends what convertors to use with the Videojet Decoder 7523 to ensure compatibility with KBD Universal XF.

This article explains which is the difference between BVRAdmin lost password versus VRM lost password (reset) of DIVAR IP.

According to the DIP Whitepaper, the unit supported 128 channels before upgrading. After upgrade to BVMS >= 11.0, having the MBV-BPLU-DIP base, the channels licenses limit is 256 channels 

Welcome to the 3.6 release of Video Security for Windows, Android and iOS. There are new features in this release!

This article shows where to find the BIOS default password of DIVAR IP all-in-one 7000 gen4 (DIP-74xx).

This article explains what is IVA Pro Perimeter and what does 2D & 3D Tracking Parameters mean.

Bosch Remote Portal release notes are a key resource for staying informed about the latest developments, maintaining security, ensuring compatibility, and optimizing the use of the portal. Subscribe on this article and stay up-to-date with the latest news!

The Virtual Assistant event is mapped to code 751 in the alarm transmitter. It is not possible to differentiate in the alarm transmitter the different scenarios on which an event code should be customized. The event properties sent from the Alarm Management application to the transmitter contains only if it's a VIRTUAL ASSISTANT or LIVE INTERVENTION etc.