Security: Video

SecureOS sends events from analytics to BVMS, which can be translated into alarms and/or stored into the logbook.

Related Products Workstations, Z4G4, Microsoft License Question Is it possible to Activate Windows 10 by phone for Bosch Workstations? Answer With introduction of Windows 10, Microsoft disable the phone license activation for Bosch Workstations. Please perform online activation over internet.

The HDD compatibility list for DIVAR AN 3000 and DIVAR AN 5000 in the Operations Manual, page 166 or you can find it through this article. Have a look!

New check in BVMS Configuration Client has been implemented, which blocks the disabling of the "Secure connection" if camera port 1756 is disabled. This should prevent the camera from getting "unreachable" by miss-configuration of the administrator. 

The calculation of the storage capacity is done in different way in Configuration Client and VRM Monitor. Check this article and find useful details!

Please note that this recommendation might help, but cannot guarantee the high quality of the image. It depends on the camera FoV and the environment where the camera is installed.

The BVMS Logbook database can be moved to another SQL Server. This article describes the steps that are necessary to migrate the database and describes how to confirm if the migration was successful.   BVMS is using Microsoft SQL Server Express to store its logbook. Based on the information provided by Microsoft (Compare SQL Server 2017 editions), SQL Server Express is limited to a 10GB database size. This could be insufficient for larger installations or installations that require a very long logbook retention time. Additionally, some organizations have a dedicated SQL server environment which should be utilized by all applications. The BVMS Logbook database can be moved to another SQL Server. This guide describes the steps that are necessary to migrate the database and describes how to confirm if the migration was successful.

White cameo in BVMS Operator Client or "device failed" message may be caused by the NVIDIA graphic card driver that might not be compatible.

Subscribe directly to this article (Option 1) or to the firmware_release_notification label (Option 2) and you will receive a notification in your inbox every time when a new Firmware is released and added to the list within this article.

The connection of 2N® Helios IP intercom to BVMS and Bosch Access Control System is possible thanks to the implementation of ONVIF and Wiegand protocols, which ensure mutual compatibility.

This article presents what web browsers are supported by Bosch IP cameras. Also, presents the tools to be used in replacement of Internet Explorer and MPEG-ActiveX.

The RCP documentation can be found in the Firmware .zip file on the product page.

Due to the product design, the configuration of the NIR-50850-MRP (IP IR Illuminator 5000 MRP) is done only in the web browser. Also, this article contains a short explanation about how to setup the NIR-50850-MRP (IP IR Illuminator 5000 MRP).

Find out from this article how many cameras can be opened before the workstation is overloaded.

“Server is not online” message is displayed when accessing BVMS Operator Client. After clicking OK, the Operator Client is opening in a loop and never stops. What should you do?

Bosch's Remote System Management service allows you to leverage the power of the Internet of Things (IoT) to provide secure, transparent, and cost-effective asset management throughout the lifecycle of a video system. This service enables end users, system integrators and installers to perform inventory and update management, as well as health monitoring tasks for an entire Bosch video system (DIVAR IP + BVMS + cameras) from one centralized Remote Portal platform.

With the new VRM eXport Wizard, we offer the possibility to use CLI commands to do exports without needing to open the application.

This article contains a simplified and generalized example, that could be helpful in building a particular tailored script related to implementation of event receiver in BVMS SDK scriplet.

You can call desired pre-positions (PTZ) of Bosch IP cameras by using OSRD protocol or BiCom protocol. Please check this aticle to find some examples and detailed explanation.

This article provides an answer if the  an OS upgrade to Win2016 can be performed on old DIP 3000, DIP 6000 or 7000 R1.