Security: Video

This article explains how to find the source (details of the workstation) and credentials that are used to attempt to login into BVMS (when the attempt has failed)

Check this article and find out what the Start Manual Recording button of VRM Camera Cameo does in BVMS Operator Client

This article describes how you can upgrade a BVMS license to a higher version via Bosch Remote Portal. ( eg. from BVMS 11.0  to BVMS 11.1.x )

If the Host Type was set to other value than “Factory Default” for DSA E2800 and you want to integrate it with BVMS, the targets will most likely not be scannable and there will be no recordings at all.

This article explains how you can configure the iSCSI ports of your DSA E2800 dual or single controller and afterwards configure it in BVMS Configuration Client.

Prior to receiving any type of support, the customer needs to be informed that he/she must have a valid SMA (Software Maintenance Agreement)

Follow these instructions from this article if the ‘error code=1’ appears in Configuration Client - License Manager during the license activation process.

The entire BVMS installation package, available on the downloadstore, contains the client as well as the server components. When a BVMS client needs to be deployed, all of this data (over 2.5GB) needs to be copied to the target workstation, which can be quite a challenge in some environments.

When using the BVMS 9.0 installer on a Windows 10 "October 2018 update" machine (Build 1809) the SNMP services cannot be installed. Microsoft has changed the way the SNMP services are installed in Windows 10 "October 2018 update".

This step-by-step guide will help you to perform the upgrade of BVMS from v.10.1 to v.11.0 on a DIVAR IP 7000 AIO GEN 3 (DIP-7380-00N)

This article explains what is BVMS Operator Client and how this work with cameras in live view mode. 

Check this article and find out if you can add and see a BVMS 11 system running on a DIP in MVS webpage as unmanaged site

Here we describe the steps that would be need to be done to successfully move VRM to a new server.

The present document is intended to provide information on the VRM camera replacement functionality in the Bosch Video Management System (BVMS), as well as guidance through the process

Download BVMS Lite from the Download Area and use the quick installation guide to set-up the system.

Find out from this article which Bosch encoders and decoders are compatible with BVMS

Please check which port and protocol have been set on the camera that has the live black image.

Find out from this article which VRM version is compatible with your DIP and what BVMS version is supported.

This article lists how to configure ANR feature in BVMS and how to set up correctly the iSCSI and direct replay. 

BVMS v10.1 and  BVMS v11.0 come with a checkbox where you can logon to the Operator Client with Windows Credentials. If you want to use this function, you need to set up the BVMS Configuration Client and browse the AD users-groups. Then, the users can sign in to Operator Client with their Windows-Credentials.