Traffic detector has been developed to cope with all traffic densities up to high density like congestions and queues in front of traffic lights. It also detects non-moving vehicles and is thus applicable for smart parking. In addition to vehicles, it also detects pedestrians.
Tunnels & Highways: o Collection of traffic statistics o Detection of congestions for automatic speed signaling o Detection of wrong way driving
Intersections: o Detecting presence and volume of vehicles
Smart parking: o Detect parked cars
When camera is set to auto track (by web interface) to "auto"-> IVA is detecting an object but camera is not following.
Auto tracking works and metadata is displayed only on a stored preposition.
There was a change introduced starting with FW v.7.70.
The new feature is: i-Track only starts on VCA-Alarm.
You can either program this on presets, e.g a detection field or if you want to have Itrack active regardless of its position, you need to activate "global VCA" and assign task detection area "whole screen"
now only activate iTrack "AUXON78" so the eye is in the corner, and your iTrack will always be on sharp
Note: IVA must be active for at least one preset scene in the VCA page on the Settings tab.
If IVA is configured for one scene, then all other scenes have Intelligent Tracking enabled by default. If a scene, however, has Motion+ or IVA 5.5 Flow activated, then Intelligent Tracker is disabled for these scenes.
Please refer also to the attached document.