Security: Video

This article explains how to find and calculate the specific size of BVMS logs on your server when the log starts to overwrite your own data.

Find out from this article what you should do to fix green Image panes in BVMS

This article explains how to configure the Bosch ITS and NTCIP licensed versions of IP moving cameras to respond to National Transportation Communications ITS Protocol (NTCIP).

Port Mapping Table dialog box displays the port mapping for the IP addresses of the configured devices in your BVMS. Be aware that this option was removed starting with BVMS 11.1

Question Why I cannot see my camera in the Logical Tree from Operator Client? Answer Please make sure that you have done all the steps below accordingly. Normally, to be able to view a camera in the Operator Client, you need to: Go to the Maps and Structure tab from Configuration Client. Drag and drop the camera in question from the Device Tree to the Logical Tree. Save and Activate the changes. This step is very important because otherwise, you will not be able to see the changes in Operator Client, even though the first 2 steps were carried out in Configuration Client.

Check this article and see what's new in Project Assistant version 1.4.0

Welcome to the 2.3.0 release of Project Assistant for Windows, Android and iOS. There are many new features and bug fixes in this release that are detailed in this article.

The initial idea of the Project Assistant is nicely summarized in the video from this article

If cleaning the bubble is required, use the following procedures and comply with all the warnings listed in this article.

If you need to contact Bosch Security Systems by phone, this article provides a full list of phone numbers for all regions and countries that receive support.

This article presents what web browsers are supported by Bosch IP cameras. Also, presents the tools to be used in replacement of Internet Explorer and MPEG-ActiveX.

This article explains step by step how to add a DIVAR Hybrid 5000 in BVMS Viewer and see Live image of cameras connected to the DIVAR.

This article contains a step-by-step guide from which you can learn how to change the video stream of a camera in Bosch Video Security Client

The purpose of this article is to provide a step by step guide about how to perform backup and recovery procedures of the VRM data base in the DIVAR IP 2000 EZ Recording Appliance.   Step-by-step guide Backing Up the Working Configuration: 1.To backup the working configuration of a DIVAR IP 2000 Recording Appliance, open the Appliance's "Dashboard": 2. From the Dashboard select the "Configuration" tab in the top right hand portion of your browse:

This camera does not have the auto-focus functionality in the same sense as Autodome / Mic cameras.

This article explains how to configure an alarm communication between BVMS and Gmail e-mail address.

This article presents where you can find and download the Firmware for NetApp DSA unit. Depending on the version you need, you can access this E-Series SANtricity OS Controller Software Link for Downloads. 

Check out this article and find out the streaming capabilities of CPP7 & CPP7.3 Bosch IP cameras

If your DINION IP Thermal 8000 (NHT-8000) camera is reporting blurred/unclear/unsharp images that are randomly appearing during the day, or the night, please follow the steps below in order to fix it.

This article presents step-by-step how to check the status of the RAID array via LSA, replace & rebuild the faulty HDD (DIP 6000 AIO).