Security: Video

This articol answer answer to the question:  Is the 'Day-to-night switch over' option missing in some Bosch cameras?

Redundant network connection to a NetApp array can be configured with virtual interface. NetApp provides tree different types of virtual interfaces (VIF). Check this article and find more details!

Check this article and see how to solve if the cameras in Alarm Management cannot use services activated in Remote Portal. 

The Clear button on the Configuration Manager is designed to clear the codes that are self-generated by the IP firmware or the Configuration Manager itself. Follow the steps below, if you want the "Clear" button from Configuration Manager to able to erase the Alarm task script that are self created by users themselves.

This article gives you few tips to find out why the RealShot Manager does not communicate correctly

The maximum resolution of 5.3 MP can only be achieved with H.264 encoding

Find out from this article the compatibility status between Microsoft Windows 10 Enterprise LTC and Bosch Intelligent Insights

NetApp® from time to time provides new HDD firmware for the various HDD / disk models. In January 2024 an NetApp Knowledge Base Article was created that needs to be taken into consideration as well.

This article explains how to avoid black lines appearing in the live view of Bosch cameras.

Using the camera's Dropbox account when doing an export from the VSC app is not possible anymore with the newest version of FW.

This article shows step by step how to call a FLEXIDOME IP panoramic 5000 camera preposition in Operator Client. 

This article presents causes and solution regarding NTCIP control of Auto focus, Auto iris and wiper functions.

ONVIF control of the thermal DZ was never planned for the MIC-9000i in the launch of the product. However, you can get the Pan and Tilt via ONVIF Device Manager to work by enabling the PTZ configuration of the stream. 

This step-by-step guide helps you to find how you can configure the email settings for Sony cameras

BVMS Desktop screen (BVMS Kiosk screen) has several customization possibilities for introducing a company logo picture and a custom text, as well as selecting if an application icon will appear on the screen or not.  Follow this article to see the guidance on how to make these customizations.

This article explains how to enable or disable audio recording for specific camera in BVMS, on action of BVMS Operator Client user.   Follow the step-by-step guide from this article.

This article presents the considerations that should be taken into account when using the conduit adapter NDA-3080-CND for installation: For protection against water ingress we recommend to avoid top entry for the conduit adapter and use the side and bottom entry position Mark the position of the hole of the surface Drill the hole with the appropriate diameter drill Install a plug in the hole Put the cable through the hole of the conduit plate Attach the conduit plate with the conduit plate adapter to the surface Install the conduit cover on the conduit plate. Tighten the two screws with the TR15 Allen key

Find out from this article what should be done when the MIC IP STARLIGHT 7100I cameras pan but do not tilt

This article describes what shoud be done to achieve an Optical Zoom for FLEXIDOME IP 3000i IR camera.

This article presents what should be checked when the Sever State is Disconnected in Logical Tree from BVMS Operator Client.