Security: Video

Learn how to customize the BVMS Operator Client to display more than 4 cameras by adjusting the maximum rows of image panes in the User Interface settings within the BVMS Configuration Client.

A red LED will be displayed in front of the damaged HDD. On DIP-74xx with RAID5, with only one faulty HDD, there is no DATA LOSS.

This article will guide you how to remedy invalid expansion licenses on your Bosch Divar IP 5000 all in one.    Error indication Despite that the registration of your additional purchased licenses has been completed successfully. The licenses may become invalid  after a  following reboot. This behavior is caused by switching the MAC address of your teaming interface.  

This article explains how to enable the blurring feature on the DINION 7100i IR camera. Available with firmware version 9.10.0192 or later, blurring can be activated through the camera’s configuration settings.

This article answers whether the DINION IP Starlight 7000 HD camera (NBN-73023-BA) can be set to corridor mode for narrow spaces like hallways and explains why this model doesn't support a 90-degree rotation setting.

The following instruction describes how to create a RAID5 logical volume on the DIVAR IP all-in-one 7000 4th gen. This procedure will wipe the current logical volume and therefore cause DATA LOSS.

When the VSG IP address needs to be changed, the old recordings will not be available

This is how every VRM behaves when it is accessed in a web Browser. This is happening because there is no https certificate loaded on the VRM and you can't even create a self-signed certificate for HTTPS access like for cameras. You need to click on "Advanced" and then on the link bellow. So, this is the way it is intended to work.

For connecting the Bosch IntuiKey keyboard with a BVMS workstation, use the specified Bosch cable. For connecting the Bosch IntuiKey keyboard with a VIP XD decoder, you need a cable which connects a serial COM port of the keyboard with the serial interface of the decoder. 

This article explains if camera credentials are needed for the IVA Configuration plug-in.  

This article explains whether you can connect a MIC IP starlight 7100i camera to 5G devices with SDI output. Unfortunately, the MIC IP starlight 7100i doesn’t support SDI output, and currently, no adapter exists to convert its output to an SDI format.

This article explains what happen when all Accounts are removed from your Company in Alarm Management. You will not be able to create a new account at all. The Monitoring Center dropdown list doesn’t give you any option to be selected.

This article provides a solution regarding latency in the Bosch camera feed or metadata out of sync in the video (Milestone integration).

This article answer the question if a Software license (Software order ID) can be moved from an user account to another one in Bosch Remote Portal. "Yes! If the license was claimed in a wrong Remote Portal account and not activated yet for example you have the option to unclaim it and use it afterwards in the desired account."

This article present which could be de cause of ‘Unknown Error’ when trying to register DIVAR IP AIO to Remote Portal. After 15.02.2024 the minimum version for all the DIVAR IP AIO family system supported to connect to Remote Portal is 2.3.0.  

This article is a list for all cloud services and its associated devices or software including the required domains to allow them to properly operate on the network.

This article is a step-by-step guide about how to connect the Project Assistant App to a camera via USB-C WLAN Dongle. 

The pop-up dialog window message: "Setup has detected a pending restart.  Please reboot the system and rerun the installation"  appears when attempting to run the valid BVMS windows installer package.

This article is a step-by-step guide about how to access the direct link to cloud recording web interface from Video Security App (VSC).

The modern and easy to use Bosch Video Security Client, version 3.1 comes along with new features. Check this article!