Security: Video

This article describes the different components that Bosch Video Management System offers to to establish a connection between Bosch Video Management System and a 3rd party management system. This description helps you in writing your own commands for controlling Bosch VMS from inside your management system.   

 This article shows the keyboard shortcuts that can be used by operators when operating the BVMS system. 

This article will provide a basic explanation and simple examples of the interfacing (scripting, calling functions by external applications) functionality in Bosch Video Management System.

Check this article and have a look at the attached documents which describe the settings you must perform after having installed BIS and BVMS on the different computers.

In many cases a minimum and maximum retention time needs to be defined in a video surveillance systems due to legal requirements. While the minimum retention time defines the time period for how long video recordings need to be stored, the maximum retention time defines after which period of time the recordings have to be deleted. Thus, the minimum retention time is going to influence the amount of storage needed. The higher the minimum retention time the more storage space is required.

In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket.

This attached document describes how Bosch Building Technologies handles the life-cycle of the BVMS, BIS, AMS, and APE, and in which state a specific release can reside.

This article contains the LIF fie which will help you to activate the Activation Key from SLMS for BVMS Lite v10.0

This article is a step-by-step guide about how to configure IVA rules for Personal Protective Equipment (PPE) Event in Genetec Security Center.

This article is a step-by-step guide about how to configure and use IVA rules for Appearance search Event in Genetec Security Center.

This article explains why is possible to have only live view but no playback or timeline in Operator Client on a workstation. This issue might occur if the VRM (Video Recording Manager) password contains special characters that are not supported in BVMS.

This article explains why the "No Connection" message appear in the Operator Client, blocking live view and playback. The "No Connection" message may appear if the camera's password contains special characters that are not supported in BVMS.

This article provides a guide on managing stream limits and application variants for Bosch cameras in Genetec Security Center. Stream limits are essential for optimizing the streaming capabilities of Bosch cameras, ensuring optimal performance and efficiency in your surveillance system.

This article explains why can be selected only Stream 1 for ONVIF camera in live view in Op. Client (Multi-stream via VSG).

This article explains which driver should be used for Bosch cameras with Genetec Security Center? Legacy Driver Designed for Bosch cameras operating on the CPP-7.3 platform or older. This driver ensures compatibility with legacy devices. Hybrid Driver "Others (CPP13 and newer) Designed for Bosch cameras on the CPP-13, CPP-14 platforms, or newer. This driver fully supports the advanced functionality of newer Bosch cameras, providing improved UX and enhanced feature.

This article explains why does the audio or mic sensitivity revert to default on Bosch cameras connected to Milestone VMS, If this configuration was done on the camera and not in the VMS, the behavior you're experiencing is as expected when Bosch cameras are connected to a Video Management System (VMS) like Milestone.

This article provides a list of the default administrator credentials for various Bosch DIVAR IP models, including those that require setting a password during the first configuration.

This article answers the question: Can Bosch camera move with specific speed to a certain PAN & Tilt Position Coordinate (RCP command)? Moving at own defined speed can ONLY be done by • Send PAN/TILT coordinate separately + speed • Or use continues move+speed, followed by stop command. When using predefined presets, this ALWAYS happens at fastest speed.

This article provides a list with the Bosch cameras that support APC license and prerequisites to use IVA Pro Appearance in BVMS.

This article explains the possible causes of focus issues on FLEXIDOME IP 3000i IR (NDE-3512-AL) cameras.   I