Security: Video

Glutton (German: Vielfraß) defines and prevents a camera or multi-channel encoder from mounting and consuming  a large number of  blocks in a very short time.

If replacing a defective camera, the camera must be the same IP address as the defective device, and it cannot contain a GUID from a different VRM.

The configured camera TCP port is used from the BVMS Operator Client to the camera. This port is used by the BVMS Operator Client as a destination port. The source port is dynamic and therefore, it cannot be adjusted.

Hash Tag "#" is one of the few special characters, which is accepted by the camera, but it cannot be accepted on BVMS side (in order to connect to the camera) — due to the limitations of communication specifics some BVMS components are using. And as a result, communication might not work properly and "No connection" warning message in Operator Client image pane and black screen might occur

When you request to reset the DIVAR password, the Central Technical Support team provides you with the unlock codes. The unlock codes received from the CTS are valid only for 1 Day. Moreover, please make sure that the date displayed on the Live monitor matches the date you requested the password reset.

If you forgot the password of your Bosch IP recorder and you want to reset its password, the Central Technical Support Team can help you.

If you have CPP4 cameras with 6.11 firmware (FW) version and you need to upgrade them to the latest version, normally you have to upgrade to an intermediate firmware version first. But where you can find this firmware ?

Find out from this article if there are restrictions of VRM Configuration utility pre-installed on DLA

This script will make your encoder to toggle relay 1 only when IVA rule #1 alarm is active.

This article guides you to easily find the connector’s pinout of FLEXIDOME Panoramic 5100i IR camera

Follow these instructions from this article if the ‘error code=1’ appears in Configuration Client - License Manager during the license activation process.

Port 3260 is used on iSCSI ports. Control-ports require 2463, 50889, 161, 162, 80 and 443 to be accessible.

For Scriplets (because they are process of BVMS): .NET 4.8.  For SDK App: BVMS SDK .dll is compiled in .NET 3.5; .NET 4.8 can be used because it is backward compatible

The detection distance (based on the pre-defined requirements*) depends on the focal length and the size of the of the gun. 

If you have for e.g. a SNC-EM642R camera and you want to find out which device packs you need for your entire solution, follow the steps from this article.

Prior to receiving any type of support, the customer needs to be informed that he/she must have a valid SMA (Software Maintenance Agreement)

Check this article and find the compatibility matrix between Bosch cameras and Milestone

The package updates to the latest recovery image (app0), regardless of which app1 or former app0 firmware is running on any CPP4, 6, 7 or 7.3 platform.

This article answers the question:  Is there a search limit of results in BVMS Operator Client Logbook for collecting license plate data?