Security: Video

Any modification of the DIP unit IP, adding of a Network Dongle, moving of the ethernet cable in another network switch, even temporary, will stop the communication between the VRM and BVMS and could lead to issues. (e.g. No recording /iSCSI Target unreachable etc.)

Find out from this article what you should check when there is a black image of your camera in Operator Client when clicking on the Instant Playback

The digital monitor wall functionality was removed since BVMS v11.0, and this is also stated in the release notes.

The detection distance (based on the pre-defined requirements*) depends on the focal length and the size of the of the gun. 

For bullet and dome cameras the clear window / bubble is generally made out of polycarbonate with a special hard coating to provide scratch resistance.

This article provides a solution regarding why the systems aren't showing up on the dashboard in my Remote Portal account.

When using Bosch cameras for IVA Calibration performed with Bosch Configuration Manager 7.70.0090, the Scenario selection is not there anymore, and by default it selects bird's eye view.

This article answers the question:  Is there a search limit of results in BVMS Operator Client Logbook for collecting license plate data?

If you would like to exclude certain Events and Alarms from being written in the BVMS logbook you do have the option to exclude such information.  

Starting from July 2024, it will not be possible to commission new devices via MAC address (Device Layer). Running devices remain untouched until end of life of Device Layer, but new commissioning will be only possible with Remote Portal devices from then on.

You should only subscribe directly to this article (Option 1) or to the software_release_notification label (Option 2) and you will receive a notification in your inbox every time when a new Software version is released and added to the lists within this article.

Glutton (German: Vielfraß) defines and prevents a camera or multi-channel encoder from mounting and consuming  a large number of  blocks in a very short time.

For Scriplets (because they are process of BVMS): .NET 4.8.  For SDK App: BVMS SDK .dll is compiled in .NET 3.5; .NET 4.8 can be used because it is backward compatible

Note that the recordings are not removed instantly. The recordings will be deleted on the next day at 12:00 AM, after the automatic delete is changed.

This behavior is mentioned in the release notes and as a workaround you can separate the cameras into different groups. For example, if you have cameras in 2 different locations, it would be actually better to separate the cameras in 2 groups. But please be informed that by doing so, you will not be allowed to view them all together.

This behavior occurs when you have requested the SMA extension and you didn't upload the Activation file in the BVMS Configuration Client.

Port 3260 is used on iSCSI ports. Control-ports require 2463, 50889, 161, 162, 80 and 443 to be accessible.

Find out from this article what to do if the System Overview of Bosch camera shows the IR controller FW version as zeros

Find out from this article what to do if the System Overview of Bosch camera shows the Motor controller FW version as zeros

Find out from this article the steps that should be considered for a planned shutting down and powering up of your BVMS system