Security: Video

The validity of the SMA date should cover the BVMS version release date you wish to upgrade to. Otherwise, the upgrade will not work and you will get the message "It is not possible to upgrade the software of this System Info file to a newer version". Also, please note that this message could occur in case you are trying to upgrade your BVMS and it is on the latest available version released.

If you were asked by the Central Technical Support team to provide them with the Bios defaults picture with the Boot order of your DIVAR IP during the troubleshooting process of your device, please follow the steps from this article and find out how can you check the boot order of a DIVAR IP

This article explains in which conditions the users and Admin user receive Alarms in BVMS Operator Client.

This article contains some hints about what to do when the FLEXIDOME IP 3000i IR does not provide Analog stream or it provides a grey image

One of the reason for this error when trying to access the VCA Tasks/ Metadata Generation could be generated because of the configured tasks which exceeded the Script Size limit (limit=2000 bytes) and metadata cannot be read.

Log4j 1.2.17 is not actively used or called by the SQL Server or by the BVMS. This means that the vulnerabilities are not exploitable unless you install some additional components that refer to the vulnerable component. Therefore, there is no risk of exploitation within the SQL Server or BVMS environment.

Configure BVMS Operator Client credentials, so the application starts without requesting username and password and add the shortcut path of the BVMS OC to the Windows start up directory

To find out the Windows version compatible with BVMS (Bosch Video Management System), you should consult the Release Letter. BVMS compatibility may vary depending on the specific version of BVMS you are using.

Port 3260 is used on iSCSI ports. Control-ports require 2463, 50889, 161, 162, 80 and 443 to be accessible.

This articles explains what does the User Name column indicate in the BVMS Operator Client LogBook.

This article explains the meaning of the arrows in circle at the central logical tree in the BVMS Operator Client list

You have to make sure that you are not using HTTP. This is an insecure protocol and we recommended to disable HTTP because it will lead to vulnerability scan results.

This article explain what is the difference between ‘Operator Logon- off’ & ‘Operator Client Logon- off’ events in BVMS.

If you will try to use these languages as name stamp for Bosch cameras, it will display squares or not the word/s itself at all. This is not a bug or a fault, Hebrew & Thai characters are not available for the on-screen display.

‘Status 11’ means that the wiper is blocked and cannot move freely or cannot move at all. Please check if the wiper is working properly and can move freely.

If you want to change the time zone in the export, you need to add / subtract the difference (offset) to local time zone in post-processing e.g. in MS Excel or MS Access.

Hash Tag "#" is one of the few special characters, which is accepted by the camera, but it cannot be accepted on BVMS side (in order to connect to the camera) — due to the limitations of communication specifics some BVMS components are using. And as a result, communication might not work properly and "No connection" warning message in Operator Client image pane and black screen might occur

The configured camera TCP port is used from the BVMS Operator Client to the camera. This port is used by the BVMS Operator Client as a destination port. The source port is dynamic and therefore, it cannot be adjusted.

The Bosch camera can make up to two (2) recorded tours. A recorded tour saves all manual camera movements made during the recording, including its rate of pan, tilt and zoom speeds, and other lens setting changes.

In this article you will find attached an example of scriplet that turns BVMS Operator Clien in full screen mode and creates and displays a simple favorites of one camera